123 HP Envy 4500 setup | How to setup hp envy 4500 printer

1. HP Envy 4500 Setup And All In One Solutions The HP Envy 4500 setup involves unboxing the packaging material and setting up the printer model by using the user manual. Then, turn on the printer, install the cartridges, place the papers and the pages prints successfully with no issues or errors. Steps For HP Envy 4500 Setup And Installation Unpackthe printer & place it on a flat surface. Take outthe packaging material of the printer. Load papersinto the main input tray. Connectthe network cable if you connect it to the network. Fixthe phone cable for fax if necessary. Connectthe power properly into the outlet. View the Power buttonon the printer and switch it on. Then, update the firmware by using the control panel. Installthe printer software using the USB wired or wireless connection. Do a print test pageand the pages prints successfully.           How To Setup HP Envy 4500 Wireless Printer  Lift the printer from the box & place it on a flat surface. Remove the tape and all the packaging material from the HP Envy 4500 setup. Keep the fingers into the slot on the left side of the printer and pull to open the ink cartridge access door. Remove the tape and packaging materials from inside the printer. Close the ink cartridge access door. The power cord must be plugged in the other end in the electrical outlet. View the Power button on the printer and turn it on. On the printer’s control panel,press the preferred language and tap Continue to confirm the choice. Then it displays to choose the specific Country\ region and then touch Continue to confirm the choice.   

2.  Press Date and Time and it shows to set the month, year and day. Tap Done. Hold the underside of the tray and pull out the tray. Keep the paper width guides to the outermost positions. Insert white, plain paper into the input tray. Ensure that the short edge is put forward and the print side is facing down. Keep the paper width guides inward so that they rest on the edges of the paper. Push the tray towards the printer till it locks into place. Pull the output tray extender out and raise the paper catch. Keep the fingers in the slot on the left side of the printer. Pull it to open the ink cartridge access door. Wait till the printer is silent and idle before you continue. Take the ink cartridges from the packaging material. Handle the ink cartridge by its sides with the nozzles facing towards the printer. Insert the ink cartridge into the slot. Push the ink cartridge forward till it holds into place. Shut the ink cartridge access door for HP Envy 4500 setup. Read More...     