html5-img
1 / 10

Producing with a Trumpf Punch Press

Producing with a Trumpf Punch Press. Mike Miller Emech 210 4-10-02. Specifications of a Trumpf Model TRUMATIC 500 ROTATION Punch Press. 220 kN Punching force (49,500 lb) Handles up to 8mm thick sheets (5/16 in) Linear tool magazine that holds 18 tools 121.5 x 65 in working range

Jims
Download Presentation

Producing with a Trumpf Punch Press

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Producing with a Trumpf Punch Press Mike Miller Emech 210 4-10-02

  2. Specifications of a Trumpf Model TRUMATIC 500 ROTATION Punch Press • 220 kN Punching force (49,500 lb) • Handles up to 8mm thick sheets (5/16 in) • Linear tool magazine that holds 18 tools • 121.5 x 65 in working range • 60 in/sec X-axis travel speed, 40 in/sec Y-axis travel speed • 900 hits per minute high speed punching • Sorted removal of finished parts • Light barrier safety fence Info from www.trumpf.com

  3. Pictures of a Trumpf Punch Press

  4. Pictures of a Trumpf Punch Press

  5. How it Works • The hydraulic head rapidly forces the inserted punch through the piece. • The die of just over the size of the punch prevents the metal from moving or bending.

  6. Strength of Materials Reasoning • Applied shear force over area exceeds the materials Ultimate shear strength. • Ex. 1 in. Circular Punch τ = V / A where V = shear force and A = thickness times circumference τ = 49.5 kip / ( 5/16 * 2π(0.5)) in2 τ = 50.4 ksi

  7. Strength of Materials Reasoning • The ultimate shear strength for 2014-T6 Aluminum is 42 ksi while it is only 27 ksi for 6061–T6 Aluminum • The applied shear stress has obviously exceeded the ultimate shear strength, causing the piece to break • Smaller punches apply larger stresses because of the decreased area, this allows for slightly thicker plates to be used if necessary • Punches over 1 in. are angled on the bottom, also reducing the area the force is acting over

  8. Punching Possibilities Factory Example Piece

  9. Punching Possibilities Fancy Range Hoods Refrigerated Truck Parts Various Airplane Parts

  10. For more information: www.trumpf.com

More Related