How to make interlocking pavers?

1. How to make interlocking pavers? The interlocking pavers provide an aesthetic look to the walkways, driveways, and patios. The pavers are known to be more durable than the poured concrete and very easy to maintain. Before placing the Interlocking Tiles, it is necessary to form a stable base that is well compact. So, to form a stable base, you will have to excavate all unconsolidated or unstable sub-grade material. It is necessary to consider the project's final grade by adding the height of the paver unit, the depth of the sand bed, and the width of the compacted base material. By this, we can estimate the depth of the excavation needed. The next step is to compress the paver base. 3 to 4 inches of the compressed base is required for pedestrian traffic, 4 to 5 inches of the compressed base is necessary for vehicular traffic. 6 to 8 inches of the compressed base is necessary for large vehicles to drive over the paver installation. Now, it is required to fill the scooped-out site with the proper quantity of paver base material and compress it by utilizing a vibrating plate compactor. The foundation should be thoroughly compressed and levelled to form an even and smooth surface over which the bed of sand will be made. During the preparation of the base grade, it is to be remembered to provide 1/8 to ¼ inch of drop per foot for proper drainage. The next step to form the interlocking tiles the pavers are placed on the sand bed starting to place them one by one in a forward direction. It is essential to provide a final smooth level and help to keep the pavers in place. Now is the time to vibrate the pavers.

2. The next step is to sand the pavers. The process of cleaning the interlocking tiles Garden hose pipe should be used for cleaning the paver system. Clean it with soapy water, scrubbing brush or broom, and rinse the paver system with a hose. Advantages of interlocking tiles The durability of concrete Pavers: The physical characteristics of the pavers permit for approximately four times the load- bearing weight of a standard concrete slab (nearly about 8000 pounds per square inch compared to 2000 pounds per square inch of some concrete slabs). The high strength of concrete pavers permits heavier loads. The duration of life is also higher than that of the asphalt or the standard concrete. The flexibility of Concrete Pavers: The interlocking concrete paver system is flexible, adjusts with the environment, and avoids seismic cracking and distortion. The concrete slabs are not as flexible as the interlocking concrete paver system, leading to cracking and shrinkage over time. Repair and maintenance of the Concrete pavers: The maintenance and the repair of the paver system are easy, simple and very affordable. If the pavers become stained or damaged for some reason, it is just needed to replace the older paver with a new one. The maintenance of asphalt and concrete slabs are much more complicated. The resurfacing of the asphalt and the concrete slabs are very time consuming and expensive. Why should you choose us?

3. Our company provides the best technology in the field of flooring. We also provide the after-sales service for the maintenance of the flooring. Our relationship with the customers does not end up after selling the products. The cost of the product and the services provided by us is very minimal and reasonable. In our company, the process of manufacturing the product is very good such that the products possess adequate strength and are long lasting.