Konica Minolta Service Center

1. Top 4 Konica Minolta Printer Error Top 4 Konica Minolta Printer Error Code List With Solutions Code List With Solutions Welcome to our collection of Konica Minolta printer errors, which is a subset of our list of printer error codes. Because the naming scheme tends to be very brand-specific, we have chosen to share error codes, along with their answers, based on the printer brand to make life easier for our readers. 1:- Konica Minolta Error Code 0094 Solution 2:- Konica Minolta Error Code 107 Solution 3:- Konica Minolta Error Code 535 Solution 4:- Konica Minolta Error Code C0500 Solution

2. 1 1: :- - Konica Minolta Konica Minolta Error Code 0094 Error Code 0094 Solution Solution The IDC sensor’s inability to detect shutter level or retraction failure is the cause of the code 0094; this problem is most frequently encountered with printers in the Bathtub C35 series. The M2-PRCB PJ6 connector and the M2 connection, which ensures that the drive is coupled in accordance with its design, must first be checked in order to fix the 0094 error. The connector between IDC-PRCB PJ24 is also crucial in the process of fixing this problem. If the 0094 problem still persists, you might need to test the SD2, M2, and IDC sensors’ functionality. If none of these are operating properly, both PRCB and these modules need to be changed.

3. 2: 2:- - Konica Minolta Error Konica Minolta Error Code 107 Solution Code 107 Solution One of the following possibilities could be the cause of the code 107, often known as the “scan to email error code 107”: 1. The printer cannot log in or connect to the shared folder. 2. The shared folder isn’t there. 3. The firewall settings don’t open the SMB port. Since this is frequently the cause of the printer being unable to connect to the shared folder, it is required to allow the TCP 445 port in your computer’s firewall in order to fix the code 107. Try to allow File and Printer Sharing functionality in your Windows settings if the port has been opened. While you’re doing it, verify that the shared folder is configured properly by examining its access privileges and determining whether they meet the needs of your use case. The shared folder’s name should be checked and any special characters, spaces, etc. should be removed if the scan to email error code 107 cannot be fixed. To avoid problems with using the folder in the future, limit the name to normal letters and digits.

4. 3: 3:- - Konica Minolta Error Konica Minolta Error Code 535 Solution Code 535 Solution When attempting to scan to email from a printer of the Bathtub C368 series, the code 535, commonly known as the scan error, is frequently caused by an SMTP server issue or an authentication error. Check to see if your firm recently changed email passwords since this is a regular practice to maintain a certain level of security in order to fix the scan error code 535. The Konica Minolta printer’s setupemail must be updated if the password for the email address has been changed. The issue should be fixed after the printer’s internal e-mail address has been updated with the new password. It is best to factory reset the printer and create a new configuration account if code 535 cannot be fixed. To reduce the possibility that this error will occur in those instances, we advise using a “hidden” account with a permanent email address and password.

5. 4: 4:- - Konica Minolta Error Konica Minolta Error Code C0500 Solution Code C0500 Solution An abnormal heating element is the cause of this error code. All Konica Minolta printers contain heating elements that are designed to warm the device to the ideal operating temperature. The machine will display the C0500 fault code if the roller’s surface temperature cannot rise to the necessary level in this situation. You must unplug the power cable from the wall socket and turn the machine off to fix the problem. Being familiar with parts like the heater lamp fuse, roller thermostat, and interlock switches is essential because one of them is probably to blame for the issue. If there are no subsystem errors, the heater lamp fuse must be turned on simultaneously with the power switch to start the heating process. If it doesn’t, a replacement is required. In situations where the mistake reappears, you may be certain that the roller thermostat or the interlock switches are to blame. If your printer is having this issue .

6. Contact Us Contact Us If you think this information is inaccurate or know of other ways to contact Konica Minolta Service center please let us know so we can share with other customers. And you can click here if you want to compare all the contact information we’ve gathered for Konica Minolta. ADDRESS USA MOBILE +1 (800) 408-7959 SEND US AN E-MAIL support@repair-service-center.com OUR WEBSITE www.repair-service-center.com