1 / 3

Aluminium Alloy 5052 (H32,22,O) In India

Allo Sheet and Plate - Alloy 5052 Bars, Rods, Wire (rolled or cold<br>finished) - Alloy 5052 Exporters & Supplier in Switzerland, New<br>Zealand,Netherlands,Brazil,Colombia,Egypt, Iraq,Malaysia, Nigeria,<br>Singapore.<br>Leveraging to our wide distribution network, we are able to offer our clients a<br>dimensionally accurate range of Aluminum Alloy 5052 H32. Having excellent finishing<br>properties, our offered 5052 is referred as anodize quality aluminum. Good resistance to<br>corrosion, especially in salt-water/marine atmospheres, these alloys offered by us are<br>highly applauded in the market<br><br>OZAIRTRADELINK<br>Address: F-113,Mahavir Chambers,<br>Opp.Reliefcinema,Nr.ReliefRoad,Salapose Road ,<br>Ahmedabad - 01 - Gujarat - India<br>Phone:( 91) (79) 3025 2747 | Mobile: 91 90 33 447474<br>Email:info@ozairtradelink.com | info.ozairtradelink@gmail.com<br>Web : www.ozairtradelink.com

Gauravsteel
Download Presentation

Aluminium Alloy 5052 (H32,22,O) In India

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Aluminium Alloy 5052 (H32,22,O) Exports from india to Dubai, Usa, Kuwait, Saudiarabia, Qatar, Iran, Kazakistan, israel. Allo Sheet and Plate - Alloy 5052 Bars, Rods, Wire (rolled or cold finished) - Alloy 5052 Exporters & Supplier in Switzerland, New Zealand,Netherlands,Brazil,Colombia,Egypt, Iraq,Malaysia, Nigeria, Singapore. Leveraging to our wide distribution network, we are able to offer our clients a dimensionally accurate range of Aluminum Alloy 5052 H32. Having excellent finishing properties, our offered 5052 is referred as anodize quality aluminum. Good resistance to corrosion, especially in salt-water/marine atmospheres, these alloys offered by us are highly applauded Other details: in the market.  Anodized coatings are bright and clear  The major alloying element in 5052 is magnesium in sufficient quantities  Cause substantial lowering of the melting point  Do not produce brittleness  5052 is far stronger than the 1100 or 3000 series aluminiums  Forms with reasonable bend radii WelMin 90 degree cold bend radius (for .064" thick): 1T The above values are average and may be considered as representative of 5052-H32 applications. Technical Data Sheet Chemical Composition Limits Others Weight% Al Cu Si Fe Mn Mg Zn Cr 0.05 max (each) 0.15 (total) 0.15 / 0.35 max 0.10 max 5052 Bal 0.10 max 0.25 max0.40 max0.10 max 2.2 / 2.8

  2. Aluminum 5052 is one of the higher strength non-heat treatable alloys (Annealed it is stronger than 1100 and 3003). Alloy 5052 has excellent characteristics with a high fatigue strength it is used for structures which are subject to excessive vibrations. As 5052 also has excellent corrosion resistance, especially in marine atmospheres and is therefore commonly used in boats, marine components, fuel and oil tubing. Typical Mechanical Properties Yield Strength (ksi) min bend radius (90° cold forming) Tensile Strength (ksi) Elongation % in 2" Material Temper 5052 Sheet 0.064" thick 5052-0 25-31 9.5 19 0 5052 Sheet 0.064" thick 5052-H32 31-38 23 7 1t 5052 Sheet 0.064" thick 5052-H34 34-41 26 6 1 1/2 t OZAIRTRADELINK Address: F-113,Mahavir Chambers, Opp.Reliefcinema,Nr.ReliefRoad,Salapose Road , Ahmedabad - 01 - Gujarat - India Phone:(+91) (79) 3025 2747 | Mobile:+91 90 33 447474 Email:info@ozairtradelink.com | info.ozairtradelink@gmail.com Web : www.ozairtradelink.com

More Related