Top 3 Applications for Laser Cutting in Melbourne - FORM2000

1. FORM 2000 SHEETMETAL PTY LTD F1 TOP 3 APPLICATIONS FOR LASER CUTTING IN MELBOURNE Best Sheet Metal Fabrication Service in Melbourne Thin Non-Metal Materials A laser with a 150-watt average power can be used to cut paper, plastics, fabrics, polycarbonate, wood (up to 0.4 inches) and thin acrylics. Thick Non-Metal Materials Laser with an average power of between 250 watts to 500 watts is used to cut thicker non- metal materials such as thicker plastics and wood up to one inch thick. On the other hand lasers with low wattage will have to work harder to make the same cut. This results in reduced cutting speed and in excessive heat, chemical changes or damage to the heat affected area. Metal Materials Lasers with power between 150 watts to 1000 watts or up to 2500 watts are required for working on metal sheets. Some thin metals such as cold rolled steel or stainless steel can be cut using 150-watt lasers, only when oxygen assist gas is used. From machinery parts and components, packaging, metal tags, clock faces to signs, patterns, leather upholstery and much more, laser cutting can be used for a wide array of applications. Sources: http://form2000.blogspot.com/2018/07/a-comprehensive- guide-to-laser-cutting.html