7.The LED Wall Pack Guide You Didn’t Know You Needed

1. The LED Wall Pack Guide You Didn’t Know You Needed Led Wall Pack Light Switching to LED wall pack lights can skyrocket your client’s energy savings as high as 70%.That’s a win for them, and a win for you. Since you won’t be called in for any maintenance for at least 100,000 hours.During those 100,000 beautiful hours, your client will also benefit from increased safety. In fact, wall packs are typically the go-to fixture for any place needing a security boost.

2. Criminals hate them. And with good reason.Their bright and crisp light instantly turns night into day, with no glare or hot spots. What What’ ’s s Led Led Wall Wall Pack Pack Light? Light? Wall pack lights or exterior building lights are terms that describe the outdoor lighting that is commonly mounted on the outside facing walls of buildings. This type of exterior lighting is generally used to provide illumination to ground areas frequented by vehicles and pedestrians. They also function well as an added layer of security for property owners. It is not uncommon to see multiple fixtures mounted on a single building or wall, with the fixture spacing designed to provide even lighting around the grounds. Below are a few image examples of conventional wall pack lighting mounted on an exterior wall.

3. Why Why should should you you use use an an LED LED wall wall pack pack light? light? Here Here are are some some reasons reasons Minimizes Energy Consumption  Metal halide and HID wall packs and other traditional lighting systems consume a lot of energy and hence they become quite tricky to use for a prolonged time span. On the contrary, the LED wall pack lights use only 25-50% of the energy

4. compared to the conventional lighting systems. This is how you can reduce your lighting bills as well. Minimal Maintenance Costs  The commercial LED wall packs are very long-lasting, and do not require replacements. They last from 50,000 to 100,000 hours and hence the owner just need to spend some amount on buying and installing them, without any further maintenance cost incurred. They can endure harsh weather conditions as they are quite sturdy. Great Light Quality  The purposes of the wall pack lights are to protect the property and the people living in it with security at night. For this, high quality and bright light are required which is assured by the LED lights. The energy efficient high-quality lighting that LED system offers is irreplaceable.

5. What What are are the the benefits benefits of of LED LED wall wall pack pack lighting? lighting? Why Why use use LED LED wall wall pack pack lights lights instead instead of of conventional conventional lighting lighting solutions? solutions? A typical outdoor wall pack light is likely to be a sodium vapor light. Sodium vapor lights are the ones that tend to be very deep yellow (or orange) in hue. Low pressure sodium vapor lights produce a monochrome emission that tends to render color very poorly in exchange for relatively good energy efficiency for a legacy bulb technology. Interior solutions for wall pack lighting include conventional incandescent bulbs, but more typically mercury vapor bulbs. While each of these technologies has their merits, industrial LED lighting

6. outperforms all of the conventional alternatives in important ways. Let’s take a look at some of the various considerations when deciding whether an LED retrofit is appropriate for your wall pack lighting. Industrial LED wall pack lighting vs sodium vapor wall pack lights: If you’ve ever walked around a parking lot or building exterior at night and noticed the deep yellow glow, the  lights you’re looking at are more than likely sodium vapor. Low pressure sodium lights emit a very deep yellow, monochromatic light while high pressure sodium lights have a slightly whiter (but still generally yellow) light. These lights were the best option on the market for efficiency prior to advances made in LEDs. MH lamps are common in sporting and warehouse/industrial uses. Benefits of MH lights include decent color rendering and  comparatively adequate foot-candle levels . Some of their major drawbacks are that they take a long time to warm up. Their failure characteristics include flickering on and off, and wasting energy through heat. Read more about LED vs Metal Halide Lights.

7. LED high bay lighting vs high pressure sodium (HPS) lights: HPS lights are often used in warehouse, industrial,  business, and recreational facilities where high bay lighting is appropriate. Their benefits include cheap selling price, high energy efficiency (low operating costs), and relatively long lifespans. HPS lighting technology retains these advantages over most conventional bulbs, but they lose on all three counts to LED high bay lighting.

8. The downsides of HPS bulbs include the worst color rendering on the market and a warm up period. Read more about LED vs High Pressure and Low Pressure Sodium. Industrial LED lighting vs fluorescent lighting: Though somewhat less common, fluorescent lighting is  sometimes utilized in warehouse or industrial applications. The benefits of fluorescent lights include cheaper initial costs and relatively high efficiency . Downsides include the presence of toxic mercury, decreased lifetime if switched on and off frequently, and requiring a ballast to stabilize the light. Read moreabout LED vs Fluorescent Lighting.

9. What What are are three three major major benefits benefits of of using using LED LED lighting lighting technology technology for for all all applications? applications? It’s no secret that LED lighting technology has surpassed the capabilities of conventional lighting in important ways. In addition to the considerations discussed above, there are three general benefits of LED lighting that apply to all lighting applications, not just high bay.

10. 1.Decreased maintenance requirements.As discussed above, LED lights have a lifespan that is four to forty times longer than conventional bulbs. This means fewer replacements for bulbs that wear out. LED lighting technology also generates light differently than typical fuel and filament lighting because it uses a diode instead . This means that there are fewer moving pieces to break and, consequently, fewer repairs or replacements. Maintenance is an especially important consideration when it comes to industrial lighting or warehouse lighting. Wall pack lighting most often has higher mounting heights, which means that changing a bulb requires, at a minimum, a ladder and, in some cases, specialized hydraulic lifts. All of this adds up in the form of maintenance, labor, and equipment costs. The lifespan of industrial LED lighting means that fixtures need to be changed much less often, which means savings for your bottom line. 2.Improved lighting quality.LED lighting for wall pack lights typically score better in a head-to-head comparison against most other bulbs when it comes to color rendering index (CRI), correlated color temperature (CCT), and foot

11. candles. CRI is a measurement of a light’s ability to reveal the actual color of objects as compared to an ideal light source (natural light). In non-technical terms, CCT generally describes the “glow” given off by a bulb – is it warm or cold ? Foot candles compare the amount of light coming from a source and the amount of light hitting the desired surface; they’re basically a measure of efficiency. On all three fronts, LED lights perform very well. 3.Increased energy efficiency.Not only do LED lights generate light differently, they also distribute light differently than conventional lighting solutions, which results in less energy required to provide the same output. How does that work? First, many conventional lights waste a lot of the energy they produce by emitting it as heat . Second, most conventional lights are omnidirectional, which means that they output light in 360 degrees. So, a lot of light is wasted pointing at a ceiling or being diluted because it has to be redirected through the use of fixtures. Industrial LED lighting for applications that require wall pack lights eliminates these two problems of wasted energy.

12. Any interest in adding Led Wall Pack Light to your business? It would be a great choice. Just contact us online, you will surprised to find us a good and reliable supplier, as well as interesting partner in global business. About About Bbier Bbier

13. Shenzhen Bbier Lighting Co., ltd, Professional Commercial LED Lighting Supplier. It was founded in 2008 LED luminaires manufacturing organization (Factory), Our factory has ISO9001: 2008 standard and leader in manufaturing all series of innovative energy saving projects LED luminaires for United States wholesale distributor (Importer) and solution company of lighting. Mainly product categories: UFO LED High Bay Lights, LED Grow Lights, LED Post Top Lights, Solar Post Top Lights, LED Shoebox Lights, LED Stadium Lights, LED Street Lights, Solar Street Lights, LED Gas Station Lights, LED Corn Light Bulbs, LED Flood Lights, Temporary Work Lights, Explosion Proof LED Lights, LED Canopy Lights, LED Classroom Lights, LED Emergency Lights, LED Exit Signs, LED Office Lights, LED T8 Tubes, Linear LED High Bay Lights, LED Dock Lights, LED Garden Lights, LED Industrial Lights, LED Retrofit Kits, LED Wall Pack Lights, Portable LED Work Lights, Rechargeable LED Work Lights, Solar Flood Lights, Solar Lawn Lights,Solar LED Garden Lights, Solar LED Yard Lights,etc. We have 10 Years of LED Lights Development Experience, 50 LED lights patents, 200 LED Lights Certifications, all LED products have 5 Years Warranty and ETL DCL Listed... View More