How To Get Candle Wax Out Of Carpet

1. How To Get Candle Wax Out Of Carpet

2. If you’ve ever been curious how to get candle wax out of carpet, you know that it’s not an easy thing to do. Candle wax can be sticky and difficult to remove completely, so it’s important to have the right tools and plan in place before attempting to tackle this project yourself. There are several methods you can use to successfully remove candle wax from carpet, but they’re only effective if you know how candle wax reacts when introduced to common household items. Keep reading to learn more about how to get candle wax out of carpet without damaging your flooring or causing harm to yourself or your family members.

3. How to Remove Candle Wax from Carpet Get an old towel You want something absorbent, so head to your kitchen and grab an old towel. This will help catch most of the liquid from melting wax. Get a spoon: One that won’t melt into pieces when it touches hot wax! Use tweezers if you have them. Tweezers are useful for getting those hard-to-reach clumps. Be sure they won’t be ruined by contact with heat, too. Scrape off as much as you can With a spoon or your fingers, scrape off as much of that melted mess as possible. You want any remaining waxy bits, so don’t scrape too hard and make sure your towel is under everything to prevent it from spreading around even more.

4. Put ice cubes on the stain Candle wax spills on carpets and upholstery are often hot, which means they can permanently set in before you notice them. The best way to deal with it is by setting a few ice cubes on top of your spill right away. You’ll want to work fast the longer you wait, the more likely it is that ice won’t do anything to help and make sure that everything around your stain has already been removed (candleholders and everything). Once the ice is set on top, push down firmly into your sooty spot. This should loosen up any residual dried-on wax. Then blot up with paper towels. Repeat as necessary, until no more stain transfers onto your towels after blotting.

5. Soak up as much liquid as possible As soon as you see a spill, pour some cold water over it. The faster you can absorb it, the better. Once that’s done, put down some paper towels or a clean rag to soak up what’s left. You can also lightly press a towel into place and carefully lift it up after about five minutes. This will help remove liquid from underneath carpet fibers so you don’t have to deal with seepage later on (or turn your entire house upside down trying). If there are still patches that won’t come up, consider renting an iron at your local hardware store; make sure to protect your hands and clothing by wearing gloves first! And always do a spot test before using any type of heat source around the fabric.

6. Lightly scrape off excess wax Once you’ve determined that there’s a stain, it’s best to remove as much of it as possible. Use an old spoon or dull knife (whatever you have on hand) and lightly scrape away at any excess wax on top of your carpet. The goal here is not to rub it into your carpet that will only make things worse. Just scrape away some of it; if necessary, use a cleaning solvent or other gentle degreaser with warm water if there’s still something left behind. At this point, though, it should be obvious that scraping is all you need.

7. Vacuum Use a wet-dry vacuum, or just tap a plastic bag over it and then slide it off. Get as much as you can into a pile, then try scraping at it with an old credit card or another thin plastic object. If that doesn’t work, dip a corner of an old towel in warm water, wring it out slightly so that it’s damp but not dripping wet and press down on your problem spot. This will melt some of the wax but leave its surface behind. Scrape again with your credit card; repeat until all remnants are gone. Visit: Carpet Cleaning Hacks