7 steps involved in sealcoating a driveway

1. 7 steps involved in sealcoating a driveway

2. Driveway sealcoating or sealing the driveway creates a layer of cell that acts as a boundary that keeps safe the concrete or other substrate from the effects that cause physical damages such as effects from sun, ice, oil, traffic, rain etc. Read this information about sealing a driveway to preserve its structure and appearance. Most of the service provider from Ancaster follows the steps to give you the optimum result

3. Equipment and materials required. • Brush (stiffed and bristled) • Push broom • Asphalt driveway sealer (sealant) • Compounds used for patching • Oil/gas stain detergent • Garden hose with a spray nozzle • Pressure washer • Materials • Application brush • Gloves

4. Direction:1 Prepare the Environment Remove any grass that has grown over the edges of the surface and sweep it clean with a push broom. Clean any oil or gas stains with a stiff-bristled brush and a detergent formulated specifically for this purpose, which can be bought at auto supply stores.

5. 2 Cracks and depressions should be filled in. Fill in significant cracks or depressions in the asphalt with patching chemicals, which may be found at home improvement stores. For these chemicals, follow the drying time instructions on the label.

6. 3 Saturate the asphalt Spray the area with a thorough spray from a garden hose or pressure washer to eliminate any dirt missed during the sweeping procedure. Allow enough time for the surface to dry.

7. 4 Sealants should be mixed together. Turn the driveway sealer container upside down with the lid closed to pre-mix the contents. Continue to stir the sealant once it has been opened to ensure that it is well-mixed.

8. 5 Put the Sealant on. Pour some asphalt driveway sealer on the surface, starting in one corner. Instead of creating lengthy thin strips, you'll probably find it easier to work on one tiny square portion of around 10 to 20 square feet at a time. With a long-handled application brush or squeegee, apply your sealant in thin, overlapping applications. Remember that applying a thicker coating of sealant will not provide more protection, so follow the manufacturer's directions.

9. 6 Allow Sealant to Dry The drying time is at least 24 hours, during which time no traffic of any kind should be allowed on the surface. To prevent automobile access, use barrels at the entrance to your yard, or just use the empty sealer tubs. Drive a post into the ground on either side of the entryway and string some yellow construction tape between the posts for better visibility.

10. While seal coating can help maintain a driveway, its usefulness in extending its service life is limited. If the original foundation was not sound, or if the soil was clay or silty, or if the driveway has aged to the point that there are numerous or significant cracks, resealing may be of little value. If you are in Ancaster and looking for sealcoating experts, then consult an authentic Driveway sealcoating professional in Ancaster. It is suggested that you undergo a regular inspection once a year