1 / 12

Cisco 350-601 dumps exam questions latest update in September

Cisco 350-601 "Implementing and Operating Cisco Data Center Core Technologies (DCCOR)", the latest exam practice materials for September

Beavers2
Download Presentation

Cisco 350-601 dumps exam questions latest update in September

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. https://www.leads4pass.com/350-601.html 2024 Latest leads4pass 350-601 PDF and VCE dumps Download 350-601Q&As Implementing and Operating Cisco Data Center Core Technologies (DCCOR) Pass Cisco 350-601 Exam with 100% Guarantee Free Download Real Questions & Answers PDF and VCE file from: https://www.leads4pass.com/350-601.html 100% Passing Guarantee 100% Money Back Assurance Following Questions and Answers are all new published by Cisco Official Exam Center 350-601 PDF Dumps | 350-601 VCE Dumps | 350-601 Practice Test 1 / 12

  2. https://www.leads4pass.com/350-601.html 2024 Latest leads4pass 350-601 PDF and VCE dumps Download QUESTION 1 DRAG DROP An engineer must configure an LACP port channel on two Cisco Nexus 7000 Series Switches. The interface e1/2 must be a hot-standby link that initiates negotiation with other ports. Drag and drop the commands from the right onto the blanks in the configuration on the left. Not all commands are used. Select and Place: Correct Answer: 350-601 PDF Dumps | 350-601 VCE Dumps | 350-601 Practice Test 2 / 12

  3. https://www.leads4pass.com/350-601.html 2024 Latest leads4pass 350-601 PDF and VCE dumps Download QUESTION 2 DRAG DROP Refer to the exhibit. The Cisco Nexus Series Switches SW1, SW2, and SW3 are connected via Layer 2 copper interfaces. An engineer implements loop prevention standard IEEE 802.1w on each VLAN lo provide lasier recovery from network changes or failures. The Implementation has these requirements: 1. Interfaces that are connected to Layer 2 hosts must not receive STP BPDUs. 2. The implementation must detect unidirectional links due to one-way traffic twisted- pair links 3. Bridge assurance must be enabled between SW2 and SW3 The Layer 2 domain must be protected from superior BPDUs that arrive from external switches. Drag and drop the code snippets from the right onto the blanks in the code on the left to complete the configuration for 350-601 PDF Dumps | 350-601 VCE Dumps | 350-601 Practice Test 3 / 12

  4. https://www.leads4pass.com/350-601.html 2024 Latest leads4pass 350-601 PDF and VCE dumps Download SW3. Not all code snippets are used. Select and Place: Correct Answer: interface ethernet 1/4 spanning-tree port type network udld aggressive interface ethernet 1/5 spanning-tree guard root interface ethernet 1/6 spanning-tree port type edge In the question, we have 4 most important requirements: 350-601 PDF Dumps | 350-601 VCE Dumps | 350-601 Practice Test 4 / 12

  5. https://www.leads4pass.com/350-601.html 2024 Latest leads4pass 350-601 PDF and VCE dumps Download 1. Interfaces that are connected to Layer 2 hosts must not receive STP BPDUs. 2. The implementation must detect unidirectional links due to one-way traffic twisted-pair links. 3. Bridge assurance must be enabled between SW2 and SW3. 4. The Layer 2 domain must be protected from superior BPDUs that arrive from external switches. 1st: command spanning- tree port type edge disables stp process on port 2nd: udld aggressive enables UDLD in aggressive mode 3rd: Bridge assurance is enabled globally by default on NX-OS. However, we do have to change the spanning-tree port type to network on interfaces 4th: Root guard is enabled with the interface command spanning-tree guard root. Root guard is placed on designated ports toward other switches that should never become root bridges. QUESTION 3 Refer to the exhibit. 350-601 PDF Dumps | 350-601 VCE Dumps | 350-601 Practice Test 5 / 12

  6. https://www.leads4pass.com/350-601.html 2024 Latest leads4pass 350-601 PDF and VCE dumps Download The gateway of Server 1 is in the VLAN 100 SVI on N5K-1 and the gateway of Server 2 is in the VLAN 200 SVI on N5K-2 Server 1 must connect to Server 2 using unidirectional traffic. Which action accomplishes this requirement? A. Add VLAN 100 and 200 to the allowed VLANs list on the Ethernet 1/1 interface on NK5- 1. B. Assign VRF WEB membership to interfaces VLAN 150 and 200 on N5K-2. C. Configure access VLAN 100 on interface Ethernet 1/2 on N5K-2. D. Create a static route in VRF WEB for the subnet of Server 2 on N5K-1 Correct Answer: D QUESTION 4 What is a feature of NFS? A. role-based access control 350-601 PDF Dumps | 350-601 VCE Dumps | 350-601 Practice Test 6 / 12

  7. https://www.leads4pass.com/350-601.html 2024 Latest leads4pass 350-601 PDF and VCE dumps Download B. Kerberos-based security model C. block-based file access D. zone-based access control Correct Answer: B https://www.cisco.com/c/en/us/support/docs/security-vpn/kerberos/16087-1.html#modifiednfs QUESTION 5 What are two requirements when planning a Cisco HyperFlex All Flash standard cluster installation using three HX240c M5 servers? (Choose Two) A. If the Jumbo MTU option in the HyperFlex installer is enabled, then jumbo frames do not have to be enabled on the upstream switches. B. The hypervisors must be installed to Cisco FlexFlash SD cards. C. If the Jumbo MTU option in the HyperFlex installer is enabled, then jumbo frames must also be enabled on the upstream switches. D. The cluster deployment type must support a mix of HDD and SSD. E. The servers must be discovered, unassociated, and connected to each fabric interconnect. Correct Answer: CE https://www.cisco.com/c/en/us/td/docs/hyperconverged_systems/HyperFlex_HX_DataPlatf ormSoftware/AdminGuide/3_ 5/b_HyperFlexSystems_AdministrationGuide_3_5/b_HyperFlexSystems_AdministrationGuide_3_5_chapter_01111.html QUESTION 6 What is an advantage of NAS compared to SAN? A. It provides lossless throughput B. It functions in an existing IP environment C. It offers enhanced NFS features D. It offers enhanced security features. Correct Answer: B 350-601 PDF Dumps | 350-601 VCE Dumps | 350-601 Practice Test 7 / 12

  8. https://www.leads4pass.com/350-601.html 2024 Latest leads4pass 350-601 PDF and VCE dumps Download QUESTION 7 DRAG DROP A network engineer is asked to describe the cloud infrastructure models from the perspective of their operation and access to resources. Drag and drop the descriptions from the left onto the appropriate. Select and Place: Correct Answer: 350-601 PDF Dumps | 350-601 VCE Dumps | 350-601 Practice Test 8 / 12

  9. https://www.leads4pass.com/350-601.html 2024 Latest leads4pass 350-601 PDF and VCE dumps Download Private Cloud: owned, managed, and operated by a single organization. Community Cloud: Owned, managed, and operated by one or more organizations or teams. Public Cloud: Provisioned for open use. Hybrid Cloud: At least two or more separate cloud infrastructures are connected together to facilitate hosted data and application portability. QUESTION 8 Refer to the exhibit. What is the result of this series of commands? A. It reboots the server immediately. B. It verifies the firmware update on the server. C. It activates the firmware on the next adapter boot. D. It updates the firmware on adapter 1/1/1 immediately. Correct Answer: C https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/CLI-User- Guides/Firmware- Mgmt/4-0/b_UCSM_CLI_Firmware_Management_Guide_4- 0/ b_UCSM_CLI_Firmware_Management_Guide_4-0_chapter_011.html 350-601 PDF Dumps | 350-601 VCE Dumps | 350-601 Practice Test 9 / 12

  10. https://www.leads4pass.com/350-601.html 2024 Latest leads4pass 350-601 PDF and VCE dumps Download QUESTION 9 Where does the witness VM reside in a Cisco Hyperflex Edge deployment? A. Windows application B. Hyper Rex Data Platform C. Cisco Intersight D. local HyperFlex datastore Correct Answer: C QUESTION 10 The Cisco UCS blade chassis must send SNMPv3 traps to a network monitoring system. The SNMP trap messages should be authenticated and have protection from closure. Which SNMP security privileged level should be configured? A. noPriv B. auth C. noAuth D. priv Correct Answer: D QUESTION 11 An engineer must optimize ARP responses and reduce unnecessary ARP broadcasts over the VXLAN/EVPN fabric. Which action accomplishes these tasks? A. Configure ip proxy-arp under the VLAN SVI associated with the VXLAN VNI. B. Configure ip proxy-arp within the VXLAN VNI configuration under the VTEP NVE interface. C. Configure suppress-arp within the VXLAN VNI configuration under the VTEP NVE interface. D. Configure suppress-arp under the VLAN SVI associated with the VXLAN VNI. Correct Answer: C QUESTION 12 DRAG DROP An engineer must configure a control plane policy on a Cisco Nexus 9000 Series Switch that is located at IP 192.168 20.1 that moots those requirements: 350-601 PDF Dumps | 350-601 VCE Dumps | 350-601 Practice Test 10 / 12

  11. https://www.leads4pass.com/350-601.html 2024 Latest leads4pass 350-601 PDF and VCE dumps Download 1. Only HTTP. RDP. and ICMP traffic is permitted from subnet 192.168.10.0/24. 2. The committed information rate must be 54000 pps. 3. The burst size must be 128 packets. 4. Any other traffic must be dropped. Drag and drop the code snippets from the bottom onto the blanks in the code on the top to complete the configuration. Not all code snippets are used. Select and Place: Correct Answer: 350-601 PDF Dumps | 350-601 VCE Dumps | 350-601 Practice Test 11 / 12

  12. https://www.leads4pass.com/350-601.html 2024 Latest leads4pass 350-601 PDF and VCE dumps Download QUESTION 13 A Cisco ACI engineer must configure an access port on a Cisco ACI leaf switch. The access policy should be configured so that it supports L3Out connectivity concurrently with several EPGs that are mapped to this interface with the static port method. How should the access policy be configured? A. by linking the interface policy group to multiple Attachable Access Entity Profiles B. with two interface policy groups that are linked to the same interface profile port selector C. by mapping a single physical domain, mapped to the L3out and EPG interfaces D. with a single Attachable Access Entity Profile that is linked to the corresponding routed domain and physical domain Correct Answer: D 350-601 PDF Dumps 350-601 VCE Dumps 350-601 Practice Test 350-601 PDF Dumps | 350-601 VCE Dumps | 350-601 Practice Test 12 / 12 Powered by TCPDF (www.tcpdf.org)

More Related