1 / 3

Engine Piston Head | Piston V2 & V3 Gearbox | Aztech Innovations

Do you want Engine Piston Head, Piston V2 & V3 Gearbox? Then connect with Aztech Innovations. We provide the best Engine Piston Head, Piston V2 & V3 Gearbox to you at affordable prices. For more information call us now - 480 284 137 or visit our website.<br>https://aztechinnovations.com.au/products/xtremenylonpolymerpiston

Aztech
Download Presentation

Engine Piston Head | Piston V2 & V3 Gearbox | Aztech Innovations

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Piston V2 & V3 Gearbox Engine Piston Head & Piston Body This piston literally ticks every single box for the ultimate AEG Piston. Custom made Fibre-reinforced PA66 Polyamide (Nylon) Lightweight Piston, CNC head, hardened Cr12MoV rack, strengthened and weight reduced with large windows in the low-stress areas, with total weight is under 27.5 grams, this is DSG and high rate of fire ready out of the box. We have over-engineered the piston as much as physically possible. Nearly doubling the amount of material to the highest stress point at the back of the piston bridge to increase support for the pick-up of the tooth with 80% more material than every other piston we have measured and tested. We opted for Cr12MoV hardened steel as it is the strongest metal we could use to ensure maximum life and outright breaking strength. Then added in every piston head feature we could, all this culminates in the ultimate piston!

  2. Our strengthened and reinforced, lightweight and over engineered piston features: -Lightweight ported and reinforced ultra strong PA66 Polymide Piston -Cr12MoV hardened 14 tooth rack -CNC 6061 Aluminium Cylinder head -9 Port head for max flow -Back cut chamfer for O'ring contraction -360 degree axial thrust bearing spring seat -CNC Aluminium head mounting plate -Viton long life max seal o-ring Main properties of PA 66 Reinforced Nylon include: High strength and stiffness at high temperature Extreme light weight out of the box. Good impact strength, even at low temperature Very good flow for faultless injection molding with low risk of air bubbles. Good abrasion and wear resistance Excellent oil and solvent resistance Good fatigue resistance It is highly recommended to bond the steel rack to the body of the piston for high performance builds. We recommend a high strength Gorilla Grip 2 part araldite epoxy as an absolute minimum or We recommend using JB Weld Original Steel reinforced Epoxy for the highest strength bond available. Available at wholesale in minimum quantity of 10 units per order!

  3. Piston Head Aztech custom made 6061 aluminium CNC ported piston head. Chamfered 8 port head for max airflow and O ring pressure, back cut O ring groove for faster O ring release to eliminate vacuuming. Includes CNC aluminium bearing plate retainer, thrust ball bearing housing and plates and screw plus one of our Viton O rings. We highly recommend using a medium grade loctite on the center screw to ensure the piston head stays firmly attached to the piston body.

More Related