The Multi Series DL2-Multi

1. The Multi SeriesDL2-Multi SKIPPER Electronics AS Enebakkveien 150 0680 Oslo www.skipper.no Tlf. +47 23 30 22 70 Fax +47 23 30 22 71 sales@skipper.no support@skipper.no

2. SKIPPER DL2-Multi • SOG and STW 2 Axis Doppler Speed Log • 9” Touch display. • JB70D2 Electronic unit • Convenient mounting • Plugable spring terminals (Wago) • DIN or screw wall mounting • NMEA over LAN (IEC61162-450) • NMEA normal • Web or Display setup • LAN, Pulse, Aux, Analog and NMEA interfaces • Main system software is now in the interconnection unit, 9” Display features in the display. SKIPPER Electronics AS Enebakkveien 150 0680 Oslo www.skipper.no Tlf. +47 23 30 22 70 Fax +47 23 30 22 71 sales@skipper.no support@skipper.no

3. The DL2 Multi– JB70D2 interconnection unit • Totally new system consisting of: • 2 x LAN (100MB) • 4 x NMEA out • 24VDC and 110-230VAC • Screw or DIN mounting • 2 x NMEA in (for multi-repeater functions or quality control) • 2x Aux out (pulse, fitness alarm, power failure alarm, Speed limits) • Auxiliary in (alarm reset) • Relay output (Function/power failure alarm/Speed limit) • Pluggable spring connectors • SD Disk for logging and software upgrade • 2x USB www.skipper.no Tlf. +47 23 30 22 70 Fax +47 23 30 22 71 sales@skipper.no support@skipper.no

4. The CU-M001 for DL2 • New 9” Touch display • Universal display for all product and repeater (to follow). • Pluggable connector Power 24V, 2 NMEA inputs, 2 CAN, 1 NMEA port • LAN connector IEC61162-450 LWE standard, and TCP/IP • Mounting for Panel, Desktop or Wall • On Screen and Web setup SKIPPER Electronics AS Enebakkveien 150 0680 Oslo www.skipper.no Tlf. +47 23 30 22 70 Fax +47 23 30 22 71 sales@skipper.no support@skipper.no

5. The DL2SG-SA Sensor • 100mm Standard Sensor • 40m Orange cable 3 pair Power, TX,RX • 4 Acoustic beams at 555kHz, temp sensor and future tilt sensor • Measures SOG from <2m to 150m* • Measures STW in first 3m under vessel • With depth output for each beam and average • Accuracy 2% , with 1% option (Code activated) • 2 Design variants – Re-openable / Fully moulded SKIPPER Electronics AS Enebakkveien 150 0680 Oslo www.skipper.no Tlf. +47 23 30 22 70 Fax +47 23 30 22 71 sales@skipper.no support@skipper.no

6. System Connection SKIPPER Electronics AS Enebakkveien 150 0680 Oslo www.skipper.no Tlf. +47 23 30 22 70 Fax +47 23 30 22 71 sales@skipper.no support@skipper.no

7. Auxiliary Connection SKIPPER Electronics AS Enebakkveien 150 0680 Oslo www.skipper.no Tlf. +47 23 30 22 70 Fax +47 23 30 22 71 sales@skipper.no support@skipper.no

8. System Connection POWER LAN Auxiliary and Alarm NMEA In and out SKIPPER Electronics AS Enebakkveien 150 0680 Oslo SENSOR www.skipper.no Tlf. +47 23 30 22 70 Fax +47 23 30 22 71 sales@skipper.no support@skipper.no

9. SKIPPER Electronics AS Enebakkveien 150 0680 Oslo SENSOR www.skipper.no Tlf. +47 23 30 22 70 Fax +47 23 30 22 71 sales@skipper.no support@skipper.no

10. Installation SETUP • The CU-M001 Graphic unit and JB70D2 talk using the LAN IEC61162-450 standard • Both units are set up with ‘unique’ IP and IDs connected to serial number. • These can be changed, but must be ‘paired’ • Alarm must also be paired, if needed • IO Should be set up as required • Default set up for Alarm and Pulse SKIPPER Electronics AS Enebakkveien 150 0680 Oslo www.skipper.no Tlf. +47 23 30 22 70 Fax +47 23 30 22 71 sales@skipper.no support@skipper.no

11. SKIPPER Electronics AS Enebakkveien 150 0680 Oslo www.skipper.no Tlf. +47 23 30 22 70 Fax +47 23 30 22 71 sales@skipper.no support@skipper.no

12. Installation Control unit SETUP • Set the system type • Setup the IP address and ID as required • Setup the Group • Pair the units (Primary remote ID) • IT is / will be possible to pair up to other systems as well SKIPPER Electronics AS Enebakkveien 150 0680 Oslo www.skipper.no Tlf. +47 23 30 22 70 Fax +47 23 30 22 71 sales@skipper.no support@skipper.no

13. Installation JB70D2 unit SETUP • Setup the IP address and ID as required • Setup the Group • If you change these you will loose connection and must return to display to reset • These changes can also be performed via web page, using the service software to relink SKIPPER Electronics AS Enebakkveien 150 0680 Oslo www.skipper.no Tlf. +47 23 30 22 70 Fax +47 23 30 22 71 sales@skipper.no support@skipper.no

14. Installation Communications • Set Required outputs of the NMEA com ports and LAN- bridge communication SKIPPER Electronics AS Enebakkveien 150 0680 Oslo www.skipper.no Tlf. +47 23 30 22 70 Fax +47 23 30 22 71 sales@skipper.no support@skipper.no

15. Installation Communications • Set Required Auxiliary inputs and outputs SKIPPER Electronics AS Enebakkveien 150 0680 Oslo www.skipper.no Tlf. +47 23 30 22 70 Fax +47 23 30 22 71 sales@skipper.no support@skipper.no

16. Installation Vessel SKIPPER Electronics AS Enebakkveien 150 0680 Oslo www.skipper.no Tlf. +47 23 30 22 70 Fax +47 23 30 22 71 sales@skipper.no support@skipper.no

17. Alarms • System has 3 alarms: • Speed High (B) • Speed Low (B) • System failure (C) • These are handled as • On Screen – No beeper so add beeper to relay if required • Hardware alarms – relay output, Aux output, Aux input (alarm reset/acknowledge) • NMEA ALR/ACK A message is sent on alarm, acknowledge and end of alarm state • NMEA ALF/ACN/ARC messages are sent and requests for changing status SKIPPER Electronics AS Enebakkveien 150 0680 Oslo www.skipper.no Tlf. +47 23 30 22 70 Fax +47 23 30 22 71 sales@skipper.no support@skipper.no

18. Calibration • 2 modes, 3rd to follow SKIPPER Electronics AS Enebakkveien 150 0680 Oslo www.skipper.no Tlf. +47 23 30 22 70 Fax +47 23 30 22 71 sales@skipper.no support@skipper.no

19. User Screens and setup SKIPPER Electronics AS Enebakkveien 150 0680 Oslo www.skipper.no Tlf. +47 23 30 22 70 Fax +47 23 30 22 71 sales@skipper.no support@skipper.no

20. User Screens setup SKIPPER Electronics AS Enebakkveien 150 0680 Oslo www.skipper.no Tlf. +47 23 30 22 70 Fax +47 23 30 22 71 sales@skipper.no support@skipper.no