1 / 7

Asphalt Drum Mix plant Process - Atlas Technologies

Accurate weighing and stable quality. Simple structure, easy operation, drying while drum rotate in counter clockwise direction (from burner), discharging while drum rotates in clockwise direction (from burner), and the wind are swirled in the center of the drum.

Download Presentation

Asphalt Drum Mix plant Process - Atlas Technologies

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Atlas Technologies Case Study For Combined 90-120 Tph Asphalt Drum Mix Plant And 200 Tph Wet Mix Macadam Plant Libya.

  2. Client Requirement The customer is a road contractor in Morocco. The customer required about 80 tphcapacity Drum Mix Plant. We offered them our DM 50, a 60-90 tph asphalt plant.

  3. Customization Customer wanted the aggregate feeder and the drying and mixing drum to be mobile. Bitumen tanks required were of higher capacity to store more bitumen. Pumping station was required even for the extra bitumen tank to compensate for failure (in case) of the pumping station of the main tank.

  4. Solution Offered We made their aggregate feeder mobile on single axle and drying and mixing drum mobile on two axles. Both these units were interconnected by internal cabling and junction box. The package offered to them was with aggregate feeder, drying and mixing drum, LDO tank, 2 x 25 T main bitumen tanks, load out conveyor, mineral filler, pollution control unit and control cabin with panel. A visit to our existing plant in India and feedback from our local customer helped the customer make the correct decision.

  5. Final Product and Loading The delivery of the equipment was done on time and the customer visited us during the loading. Below are few pictures during the loading of the equipment.

  6. Installation & Commissioning Atlas supported the customer to get the plant installed and commissioned in Morocco. One mechanical technician from Atlas visited to assist the mechanical work and one electrical technician visited to assist in the electrical work and calibration of the plant. Onsite operator training for running the plant and trouble shooting was also given. Below are the pictures of the installed plant.

  7. Contact Us Address: Block No. 97, Mahesana - Ahmedabad Highway, Behind Bhupendra Crane House, Ditasan, Mahesana, Gujarat 382710. Email:contact@atlastechnologiesindia.com For inquiry:+91 97238 10565, +91 98240 40565

More Related