1 / 8

How To Maintain The Misting System

The performance of your Fire sprinkler system in the UK depends on the nozzles. It is important to have clean and clear nozzles, and even the partial block causes poor performance.

Aspis
Download Presentation

How To Maintain The Misting System

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. How To Maintain The Misting System

  2. Misting systems come with the costs effective way to handle heat stress issues during the summer. When they fail to meet the purpose for which they are used, it becomes an additional problem. • To make it for long use, it is a better way to provide the specific check up together with the maintenance, which either comes from the DIY approach experts. • If you prefer the former approach, here are some tips that will save you a lot of money.

  3. Nozzle maintenance • The performance of your Fire sprinkler systemin the UK depends on the nozzles. It is important to have clean and clear nozzles, and even the partial block causes poor performance. • Here you should follow the given below steps to clean your nozzles

  4. When the system is running, using the brush, you have to clean the orifice of every nozzle • If your nozzles are clogged, then the following steps are for you to must be followed • With the turn off the system, you have to remove the clogged nozzles and dip into the solution that helps you to get rid of the unsightly, pesky stains caused due to the tough water in your home • Wait for it to soak for 2-3 minutes. • Then install the nozzles again and turn on your system. If they are still blocked, then it is recommended to replace them.

  5. Inspect for leaks • This is nothing more than only the inspection of parts of the plumbing system for leaks. Here are some of the steps that you should follow. • With the water source pressurized, you must check the leaks in your pump area. You must determine the protective areas used and consider removing the housing in a complete inspection. • You have to check all areas on the Mist system installationsdelivery area and look at the symptoms of leaks and their required restructure and replacement.

  6. Filter maintenance • Like most misting systems, it is important to do maintenance, and the mist system filter is not unique. • The unclean filter will curb the water flow into the pump, and results in ultimate cavitation results in pump vibrations, and make excessive noise from the pump. • If you find the misting system under certain conditions, you should clean the old filter or change it with the new one. • If you observed that the filter only needs replacement, you should consider installing the pre filtration. Here are the steps you should follow to change the filter cartridges.

  7. Seal the inlet of water supply to misting unit • Close the inlet of the water supply line to misting unit • Unscrew the housing filter by using the monkey wrench, and turn • Wash out the cartridge filter to concentrate it on the base of the canister wall. Then you have to replace the clean filter cartridge. • Remove the central ring from the filter housing and apply to the lubricant coat and insert it back into the pump.

  8. Thank you • For More Information Visit Us On: • https://aspisfiresafety.co.uk/

More Related