What is Monel Fasteners

1. What is Monel Fasteners? Monel as a term refers to a group of metal alloys which are registered under a single trademark. Originally developed by engineers working at the International Nickel Company, the trademark now belongs to the Special Metals Corporation. Monel is a group of alloys whose primary composition consists of nickel & copper. The percentage of nickel in Monel Fasteners ranges anywhere between 52% to 67%. Besides these two elements, Monel Fastener Manufacturers add trace amounts of other elements like iron, manganese, carbon, and silicon.Monel Screws are stronger than pure nickel and the alloys used to produce Monel Rivet Nut offers resistance to corrosion in a broad spectrum of chemicals and corrosive media. Top Fasteners Manufacturers in India Monel alloy’s good corrosion resistance and high strength properties also make it a great option in marine engineering, piping, cabling, chemical processing, as well as a variety of other applications depending upon what form it is used in. Being a resistant alloy, Monel 400 stands up to high temperature steam atmospheres and rapidly flowing brackish/sea water, while also maintaining excellent resistance to stress corrosion cracking in most freshwaters. It is useful in temperatures up to 1000°F (538°C) so with its anti- corrosive properties and toughness, can be an ideal choice of alloy for very unique needs and applications. Why is Monel Used? It is widely used within the oil and gas industry, thanks to this strength as well as its excellent corrosion resistance. Typically, it is used to create things like valves, pumps, pump and propeller shafts, gas tanks for storage and crude petroleum stills. Also, Monel is used for marine engineering, chemical and hydrocarbon processing equipment, fittings, fasteners, and heat exchangers. It is also used as part of metal instruments and frames of eyeglasses. Lock Nut Manufacturers in India Monel 400 vs. Comparable Stainless Steel Stainless Steels and this Monel alloy can both be cold worked, but other than that many of their properties differ. Let’s look at an austenitic stainless steel with high corrosion resistance, 316 Stainless Steel. While their thermal expansion and specific heat capacity numbers are similar, Monel 400 has a maximum temperature of 1000 degrees Celsius, almost double that of 316 stainless (590 degrees Celsius). Also, this stainless alloy has very high corrosion resistance among the austenitic stainless, but the nickel alloy greatly +91 83690 74984 | sales@anankafasteners.com | https://anankafasteners.com/

2. surpasses it in this category as well. The combination of excellent resistance at high temperatures and excellent corrosion resistance make the Monel alloy a great selection for a variety of applications. Anchor Fastener Manufacturer How strong is Monel? Monel's strength and corrosion resistance allow for use in a range of aerospace applications. After cold working, the alloy's tensile strength increases to 125,000 psi, while its corrosion resistance makes it ideal for exhaust manifold and carburetor applications. A Monel Alloy is stronger than steel and has a low coefficient of thermal expansion. These alloys are very malleable and don't easily deform or dissociate in extreme pressures and temperatures. +91 83690 74984 | sales@anankafasteners.com | https://anankafasteners.com/