0 likes | 1 Views
Learn to connect your Redback inverter to Wi-Fi using the MyRedback app. Follow step-by-step instructions for seamless setup and monitoring.
E N D
Wi-Fi Connection Instructions Before starting, please ensure you have downloaded the MYRedback App on your smart device. The App logo should look like the below image. 1. Go to your inverter. Ensure your home network signal is Good or better at this location. 2. Shutdown and restart your system, as described in sections 9.1 and 9.2. 3. Wait for the status LED to begin flashing continuously, indicating Bluetooth is advertising. 4. On your device, open MyRedback and login. Touch the Hamburger to display the flyout menu. 5. Select Network Connection. Note your system status and select Change Network. 6. You may be notified to start Bluetooth—follow the on-screen instructions, otherwise touch Bluetooth LED Flashing to continue. 7. Select your Wi-Fi network from the list. 8. Enter Password if asked, and touch Connect. A success message will appear.
9. Wait two minutes, then confirm onboarding success: - On the MyRedback app, check that data is refreshing every 20 seconds; - On the Portal, check that your system is online, and refreshing every 60 seconds. 10. If onboarding fails, try again, or contact Redback Customer Support for help.