How Sand Blasting Improves Surface Preparation Using Steel Grit for Malaysian Industries

1. ITAICHU (M) SDN BHD ITAICHU (M) SDN BHD IS MALAYSIA’S TRUSTED LEADER IN SAND BLASTING SOLUTIONS, OFFERING TOCHU SHOT BLASTING MACHINES, ABRASIVE MEDIA, AND SPARE PARTS. WE PROVIDE PROFESSIONAL SAND BLASTING SERVICES FOR INDUSTRIAL AND COMMERCIAL NEEDS. www.itaichu.com

2. 01 HOW SAND BLASTING IMPROVES SURFACE PREPARATION USING STEEL GRIT FOR MALAYSIAN INDUSTRIES? Have you ever tried to take the rust off with your bare hands? It's a nightmare. You brush, you rub, you curse in your heart. Then the rust turns round and tells the boss, Nice try, boss. And that is the frustration of most of the Malaysian factories. Old tanks that are rusted, peeling paint, greasy equipment-- they all are time- and money-wasters. You have one to-day and peels off the following week. The problem? Poorsurface prep.

3. 02 That's where sand blasting steps in. And when you mix it with steel grit, you get the industrial version of magic. Why old-school cleaning just doesn’t cut it Some factories still use wire brushes, sandpaper, or chemicals. Sure, it works — if you have all year. Let’s say you’re refurbishing steel beams in a workshop in Klang. The workers are sweating buckets, sanding by hand. After hours of effort, the surface still looks patchy. Paint won’t stick. Rust laughs at you.

4. 03 Sand blasting with steel grit changes that. It strips everything — rust, paint, oil — right down to clean metal. And it does it in minutes, not days. What sand blasting actually does? Think of sand blasting like exfoliation for steel. It shoots fine particles, usually steel grit, at high speed. That pressure knocks off rust, dirt, and coating residue instantly. The result? A clean, rough surface ready for painting, welding, or coating. The rough texture helps coatings bond stronger, so they last longer. For industries in Malaysia — where humidity and rain attack metal daily — this process is a lifesaver.

5. 04 Why steel grit beats ordinary sand? The question that is often posed is, why not use normal sand? Good question. Sand breaks down fast. It leaves dust clouds that attach onto everything even your cup of kopi. Steel grit is harder, sharper, and reusable. it gives the same effect, and does not shatter after a single use. Picture a shipyard in Johor. Blasting of huge ship hulls is done daily. When they make use of sand, they will be reloaded after every few minutes. With steel grit, they can keep blasting longer and save cost on materials.

6. 05 And since steel grit can be recycled hundreds of times, it's more economical and eco-friendly. Limited wastage, limited messing and more production. Better adhesion, fewer regrets When your coating continues to peel it is not the fault of the paint. Blame the surface. When sand blasting is done properly, steel grit creates tiny anchor patterns on the metal. These small grooves ensure better adherence of paint and coats. Peeling, bubbling, and flaking are over. In the case of such industries as oil and gas, or heavy machinery, it is all about this

7. 02 difference. Making sure that the blasting is properly done will result in less shutdowns and less maintenance in the future. Health and safety? Still counts Old sand-based blasting produced too much silica dust — bad news for workers’ lungs. Steel grit solves that problem. It’s safer, cleaner, and less dusty. With proper protective gear and ventilation, blasting rooms stay clearer. Workers see what they’re doing and breathe easier. Cleaner air means fewer accidents, better precision, and happier workers.

8. 06 Itaichu (M) Sdn Bhd — trusted by those who blast daily In Malaysia, many factories trust Itaichu (M) Sdn Bhd for their blasting abrasives. The company has supplied steel grit and other blasting materials for years. Their grit is consistent, durable, and suitable for various industries — from automotive workshops to marine yards. When you’re preparing metal that will face Malaysia’s rain and humidity, reliability matters. That’s why Itaichu’s name pops up often among engineers and workshop supervisors who want results, not headaches.

9. 07 How to know if your surface is ready? After blasting, a good surface should feel clean and slightly rough — like fine sandpaper. If you rub your glove on it and it feels slick, it’s not ready. That means oil or dust remains. Go another round. A proper blasted surface looks dull, uniform, and spotless. Why Malaysian industries can’t skip blasting anymore? Between heat, rain, and humidity, metal corrodes faster here than most places. Skipping sand blasting is like skipping primer before painting — you’ll regret it soon.

10. 05 Whether it’s construction, ship repair, or equipment manufacturing, more Malaysian companies are switching to steel grit blasting. It’s cleaner, faster, and gives longer-lasting results. Yes, the setup costs a bit more at first. But the savings in rework, coating failures, and downtime easily pay it back. View Source:- https://itaichu.wixsite.com/itaichu/post/sand-blasting-malaysia

11. ITAICHU (M) SDN BHD THANK YOU WWW.ITAICHU.COM