Wall Cutting

1. Instruction to follow for Wall Cutting When you need to make an accurate cut along a wall, it's important to find a professional you can trust who can provide you with the right tool to get the job done right. That's why when it comes to concrete wall cutting, Melbourne customers know how to call on the team at Austral Core and Saw. 1. Drill Holes in the Brick Sculptors often cut out the section of stone by drilling the multiple holes in s straight line, and then they place the explosive charges in those holes. Thus the explosion leads to cutting the plane. And when one manually cuts a brick, it works similarly. Rather than applying the explosive charges, the force by a hammer and chisel blow breaks the line along the drilled holes. To start with it, you can draw a line across the brick wall from where you want to cut out the brick portion. Then, drill into a second line drawn ¼ inch away from the first line to preserve the first line. Unless you have been using a hammer drill, you will need to push hard on the drill and even have to wiggle it a bit, but ensure that the drill does not break down. Bricks are resistant to drilling, so make sure that. 2. Cut Out the Brick With a Chisel After this, the brick holes must have punctured the entire thickness of the brick. With the help of a hammer and masonry chisel, start cutting out the brick between the holes, completing the line drawn. Try to angle your chisel towards the brick ( to be removed) so that you don't end up damaging the brick that will remain on the wall.

2. 3. Chip Out the Mortar to Free the Brick It would help if you loosened the surrounding mortar even after you have chiseled through the brick. The mortar is generally crumbly, so it becomes easy to loosen the brick by just doing some random holes into it, or you can also chip it out with the help of the masonry chisel. Don’t forget here that patience is the key to success. 4. Remove the Brick by Hand Once the brick is loosened, and the obstruction is gone, you should now be able to remove the brick from the wall just by your hand. You may need to wiggle the brick a little bit. 5. Smooth Out the Edges of the Hole Once the brick wall removal is done, you can smooth out the rough edges of the hole. You can also brush the edges to make it look smooth. Conclusion Suppose you have been looking for professionals who can help you with wall cutting or wall sawing service. In that case, Expert Wall Removal is the perfect place for your wall cutting service as they offer the best concrete or wall cutting service for your renovation project. They have experience cutting brick and concrete walls up to a thickness of 115 mm. Expert wall removal offers the most cost-effective solution to their customers and ensures quality service like none other in and around Melbourne.

3. With the help of the experts at Expert wall removal, you can get your job done right by avoiding mistakes that can cause you huge problems if something goes wrong. They offer services like precise cuts for doorways, window openings, and wall section removal. They ensure they have the highest safety standards equipment for the safety of their customers. To know in detail about the service offered at Expert Wall removal, you can visit https://www.expertwallremoval.com.au or mail them at expertwallremoval@gmail.com.