Download
1 / 5
50 likes | 53 Views
There are many applications for wall putty, the most popular of which is to apply it before the final coat of paint to extend the longevity of the paint. The best thing regarding wall putty is that it could be utilized on both dry and wet walls, and also on bo
E N D
WHAT IS WALL PUTTY & HOW SHOULD YOU USE IT? www.jkcementuae.com
INTRODUCTION • Do you want to paint your house but have found some trouble spots on the walls? Not to worry, wall putty excels in this application. Adding wall putty to the walls prior to painting guarantees a clean and even finish! • There are many applications for wall putty, the most popular of which is to apply it before the final coat of paint to extend the longevity of the paint. The best thing regarding wall putty is that it could be utilized on both dry and wet walls, and also on both inside and outside of the wall finishing. Nevertheless, in order to achieve excellent outcomes, it is important to first understand the method of putty application.
POINTS TO REMEMBER • It is important to note that the wall putty can only be added to the walls after the initial primer coat has dried. It covers the surface imperfections and even the smallest holes. It acts as a protective sub-layer for the paint. One or two coats of putty may be added if needed, but the previous coat must dry before applying the second. The desired outcome will only be obtained if the procedure is implemented correctly. • To prevent inhaling excessive dust and gravel, a surface foundation experiment must be performed while wearing protective goggles as well as a mask. A putty knife, paint sharpener, sanding block, sandpaper, a bit of fabric, a strong brush, and also some water are the necessary tools for the putty application.
POINTS TO REMEMBER • Utilising a putty knife, paint scraper, or sandpaper, you could even remove excess flakes or particulates from the walls and clean the entire surface of dust, dirt, and oil. It is suggested that you scratch off the limewash coating on your walls with a paint scraper or sandpaper. You will strip the sheen from oil-based paint-based walls by sanding them as well. • It is essential that you use a screwdriver to extract all of the loose material and dig out all of the holes. After that, just cover them with a putty mixture or plaster. When it has dried, smooth the surface with sandpaper. • We hope you liked reading about how to use wall putty and how it can support your apartment's walls. If you’re looking to purchase high-quality putty paint, consider visiting JK Cement for cement-based putty today.
THANK YOU www.jkcementuae.com
