Key Guide to getting the right Locking Struts

1. K Ke ey G y Gu ui id de e to to ge gett tti ing ng the the r ri ight ght Lo Loc ck ki ing ng S Stru truts ts Strut cards are a perfect option that can be displayed in any setting for a long duration, for special events or advertise sale products. The carton panels or foam- core show cards are susceptible to minor curling when the material is brittle, and moisture is slowly absorbed, distorting the form. It may only be minimal or can be more pronounced and visible, causing twists and bends in the product. Locking struts are not a porous material and aren’t prone to wear and tear. The cardboard locking struts piece is used on the rear, and the print is mounted on the front, similar to a common cardboard counter card. Resolution studies on the direct print option have shown that fonts as small as 6 points are entirely legible, so if you include any terms and conditions in your artwork design, there is no need to worry. With the direct print approach, the sign flute ribs are more noticeable, while the placed paper primarily conceals them. Cardboard locking struts are easy to clean and highly durable, making them suitable in any setting or work environment. Best packaging also includes screens and counter cards with locking struts. These struts are made of the board for the flute. This is a form of cardboard, and for your presentations, the marketplace has many sizes available. The die-cut shape makes it possible to pop and fold-out in the middle section, then fold back into the cavity it makes. Along a scored edge along the full length of the strut, a right angle is created. The spur is then stuck using double-sided tape on the back of a poster (usually laminated card or mounted on the board). This causes the sign on the counter-top to be placed upright.

2. Struts from White Cardboard On the back of promotional printed content for showing on counters, white cardboard struts are added. To create a freestanding display, the die-cut mounts are supplied flat and without tape and are designed to self-lock. These cardboard struts are most widely used to display counter cards to display details for the consumer to break off and carry away to enter a draw for a product or promotional pads. Utilization of struts Cardboard struts are designed in a simple, cost-effective manner to produce counter-standing graphics or notes. They are suitable for installing a graphics card and can be conveniently mounted with adhesive to the strut. For additional strength and stability, the support is available with or without an adhesive backing and comes with a rear rudder. They also have a hanging attachment, so you can suspend them from the ceiling or a rack if you so wish. What material is the white locking strut made of cardboard? The struts are made of white 165-micron cardboard. Where is it possible to get locking struts? Many sites can get locking struts, but to get it, it is strongly recommended to search for it to use the same from a known location. For more information visit the website: https://pakko.com.au/product-category/locking-struts/