How To Resolve If Window 11 Stuck on Automatic Repair Loop?

1. How To Resolve If Window 11 Stuck on Automatic Repair Loop? Sometimes, the customer encounters the error Window 11 Stuck on Automatic Repair Loop, when your Operating system is not able to boot properly. This issue due to virus attack, faulty peripheral devices and also missing drivers. To fix this issue, you should boot your device in Safe Mode. In this blog, you will read the method to resolve if Window 11 Stuck on Automatic Repair Loop. For help related to Window 11, go to www.office.com/setup. Method To Resolve If Window 11 Stuck on Automatic Repair Loop: 1. Remove Problematic Files: First of all, you have to run Command Prompt and then key in the commands: cd C:\Windows\System32\LogFiles\Srt SrtTrail.txt After this, you should put key in the below commands and then tap on Enter key after each one command:

2. cd c:windowssystem32drivers Delvsock.sys At last, you should restart your device and then check the issue has been solved or not. 2. Access the Boot Menu through Command Prompt: The user should choose the Troubleshoot option and then just open Advanced options. After this, you should choose Command Prompt from the options which displays on your screen. Then, you should put Key in the below commands, if Command Prompt window pops up on your screen: bootrec.exe /rebuildbcd bootrec.exe /fixmbr bootrec.exe /fixboot It is suggested the user can use the chkdsk command with bootrec.exe as it diagnose the metadata of the hard disk and also the errors. You should put Key in the below commands in order to use the chkdsk command: chkdsk /r c chkdsk /r d Finally, you should restart your computer and then check the issue is solved or not. 3. Boot your Device in Safe Mode: The customer should tap on Troubleshoot option and then choose the Advanced options and then tap on Startup Settings in your Windows 11 PC. After this, you should choose the option of Restart. If your Computer system restarts, then from the list you should select the Enable Safe Mode with Networking option. Now, you will view your Windows 11 computer will begin in Safe Mode. Here in the Safe Mode, you will find that there is a driver issue in the software which you are using. In this situation, you should install the updated driver. At this point, you should press the Windows key and then select Command Prompt from the start menu and then key in the below command: DISM /Online /Cleanup-Image /restorehealth

3. Then, your Windows 11 will start restoring the health of your PC. When the cleanup is complete, then you should restart your Windows 11 PC and then just install the driver which you have downloaded. 4. Reset your Device: In order to reset your device, you should use the Troubleshoot menu, and then choose Reset your PC which appears in the available options. It will automatically perform the resetting procedure. This procedure will take some time and then restart your device. At last, just check if the problem is fixed or not. 5. Run Windows Startup Repair: For this, you should go to the Advanced option from the blue screen and then tap on Enter key. After this, you should hit on Troubleshoot button and then select Advanced options. Now, you should select the Startup Repair option and it helps Windows 11 to identify the issue. At last, you should wait so that the diagnosing procedure finishes. At last, restart the PC. 6. Restore Windows Registry: To restore Windows Registry, you should open the Command Prompt and then key in the below command and then hit on Enter key: copy c:\windows\system32\config\RegBack* c:\windows\system32\config Now, you should choose all files which appear on your screen and then again tap on Enter key. At last, you should exit the cmd and then reboot your device. Through this way, the user can fix the issue If Window 11 Stuck on Automatic Repair Loop. If the user need any kind of help, then visit to the official site of MS Office via www.office.com/setup365 or office.com/myaccount.