5 Common Mistakes in Laser Engraving and How to Avoid Them

1. 5 Common Mistakes in Laser Engraving and How to Avoid Them Mistakes in Laser engraving service have become a common problem these days. This mistake compromises the quality of product and even increases the risk of damage to the product which directly leads to dissatisfaction of customers and makes them question that "are there any other services for laserengraving near me?" But Whether it is an expert engraver or a beginner, mistakes can be made by any of them and one can avoid such mistakes if they realise them on time. So, here is a list of some common mistakes to avoid in laser engravings and maintain the quality, 1. Burning the material Laser engravers work by producing heat and the most common mistake while laser engraving is burning the material due to it. Different materials have a different extent of absorbing heat so it is very important to identify the type of material and it's ability to absorb heat. 2. Choosing the wrong acrylic Two different types of acrylics are most commonly used in laser engraving. The mistake usually occurs when the wrong acrylic is chosen for a specific material which leads to incorrect engraving. Hence, the user should know about the perfect match of acrylic for the material being engraved. 3. Glass fractures The toughest material to laser engrave is glass. Deciding the perfect intensity of laser is very crucial while glass engraving as higher intensity will create glass fractures while lesser intensity thenthanuired will create blurred and frosty engraving on the surface. 4. Different results in wood engraving Although wood is the easiest material to engrave using a laser, it commonly happens that different types of wood give different results on the same setting and for the same design. To avoid this, the right type of wood should be chosen as per the demands of the customer. 5. Slower performance of machine Due to continuous usage for a long time, the speed of most laser engraver machines slows down and does not give quality results as before. The best solution to this is cleaning the machine and getting a maintenance service done regularly. So, these were some of the common mistakes which occur while laser engraving but they can be easily avoided with proper knowledge, awareness, and responsibility.