Knife Gate Valves for Water Treatment Plants

1. Knife Gate Valves for Water treatment plants

2. Introduction • Knife gate valves are designed to work in some of the extreme conditions. • Since it has a blade that is sharpened enough to cut through heavy liquids, they are especially useful in waste water treatment where corrosion is an important issue. • For example, unidirectional knife gate valves or bidirectional knife gate valves can be used in sewage treatment plants and wherever the transport of waste water, sludges and chemical or biological media need to be controlled.

3. TYPES & Objectives: TYPES • Drinking water treatment plants • Wastewater treatment plants. Objectives • Pre-filtration,  • Filtration,  • Pre-treatment, • Chemical treatment, • Disinfection

4. Water Treatment Valves

5. Knife gate valves are deployed inside the master pump section at the plant by metal seating hence they are ideal for the conditions prevailing in a pump station.  • Knife gate valve manufacturers, usually made the valves with stainless-steel material for superior corrosion resistance.. 

6. All the check valves including the pumps should be fitted with a shutoff valve to allow the isolation of the system and maintenance of the lift section equipment. • In a wastewater treatment plant ,wastewater air valves installed are isolated by gate valves. The shutoff valves for wastewater service usually comes in different forms or varieties; however, they all must be fabricated to avert clogging and damage from the flow of heavy fluids.

8. These heavy-duty water treatment valvesoperating in the pump station, allow the flow to be diverted between the two large portions located in the pump station. • The valve body deflects the internal pressure enabling the cast stainless steel not to bend or twist under extreme conditions. The stainless-steel valve manufactured under precision provides excellent fitting capability.

9. For tedious working conditions, a knife gate valve is commonly used. These knife gate valve manufacturers, usually made the valves with Cast iron or stainless steel depending upon the operational conditions subjected to PH of the media. • Since knife gate valves can cut through the sediment, they are commonly used for isolated suction of wastewater pumps because here the flow control is not necessary. • Poor quality gate valves strictly should not be used for flow control or throttling control because the vibrations produced while the gate is open partially can damage the valve.

10. For transporting the contaminants removed from the waste water in the different clarification processes these valves can be used without any hindrance or faulty functioning. • The Knife gate valves i.e., the water treatment valves control all media safely and reliably, whether in the transportation of the sludge from sewage to the digestion tanks or in the removal of sludge and gas of the digester from the digestion tanks.

11. Conclusion • We V-Tork being one of the leading knife gate valve suppliers in India have been maintaining our standards in such a way that we have set high demands among the customer base on all products we manufacture. • Right in a technical operation point of view we make sure that the customer specification requirements are crystal clear. •   We have a support team of experts who are fast and steps up to the mark on the requirement that are always on the rise.