Spring HVAC Maintenance in Dallas

1. As spring is halfway done in Dallas, you’ll have to start thinking about your HVAC system and do a spring HVAC maintenance checkup if you haven’t already. With spring HVAC maintenance, you can expect your HVAC system to be more energy-efficient and perform better. Top 5 Spring HVAC Maintenance Tips in Dallas 1. Replace HVAC Air Filter As a responsible homeowner, you must change your air filters each season. This will allow your heat pump or air conditioner to run smoothly. As we all know, air filter blocks all sorts of particles and dust from entering our home and as a result, it gets clogged quickly. When the air filter is clogged, it’ll restrict the airflow of the cooling unit. As a result, your cooling unit will have to operate longer, and eventually, you’ll have higher electric bills. Apart from this, a clogged air filter will decrease indoor air quality. As COVID-19 is spreading faster than ever, you wouldn’t want to find yourself in an overcrowded hospital with respiratory diseases, right?

2. 2. Check the Ducts Ducts carry the produced air from the air conditioner to our rooms. But when there are leaks or holes in the air duct, produced air will start to leak from them, and you won’t get your desired temperature. Besides, these leaks will lead your air conditioning unit to run longer and put your unit under a lot of stress and strain. Again, over time, air ducts can become dirty, and molds can start to from there. When there are molds in the air ducts, it can make everyone in your home sick. If you have an asthma patient in your family, you should be more worried about molds in the HVAC ducts. That’s why before the start of the spring, look for holes in the air ducts. Besides, if there are molds in the HVAC ducts, clean them ASAP. 3. Adjust the Thermostat Settings As spring in Dallas is a bit warm, you’ll have to set your thermostat setting accordingly. Easiest way to set the temperature is by adding a programmable or smart thermostat in your HVAC system. With a programmable or smart thermostat, you can control the temperature according to your schedule.

3. Besides, some programmable thermostats can detect human presence and produce cooling accordingly. As a result, when there is no one in a room, it won’t produce any heating or cooling, which will allow the HVAC system to save energy. If you don’t have this amazing technology in your HVAC system, spring is the right time to install one. You’ll notice a sudden change in your home right after you install a programmable thermostat. 4. Ensure Proper Insulation When you have broken windows or holes in your home, produced cool air will leak through them. As a result, your air conditioner unit will have to operate longer to reach the desired temperature. This will eventually put a lot of stress and strain on the cooling unit. Also, don’t forget to add the high electric bills with it. Again, if you have an asthma patient in your family, it’s recommended to close the doors all the time.

4. 5. Clean the Drainage Hole Drainage hole is usually situated in the cabinet base. If you want to run your cooling unit smoothly, you’ll have to keep the drainage hole clean. Otherwise, your air conditioning unit will have a drainage problem and put a lot of stress on the system. As a result, the overall performance of the unit will start to decline, and your comfort will get compromised too. Apart from cleaning the drainage hole, clean the P-trap as well. Easiest way to clean all these is by doing regular heating and cooling maintenance checkups. When you do a regular HVAC maintenance checkup, a heating professional will check your unit thoroughly, and if there is any problem, it’ll be fixed immediately. Powered By, https://www.greenleafair.com/ 1168 Commerce Dr Richardson, TX 75081 972-992-5006