Static Electricity

1. Static Electricity Static electricity is a stationary electric charge that is built up on a material.

2. When two different materials are placed in close contact (rubbed together) they may become electrically charged.

3. http://phet.colorado.edu/sims/html/balloons-and-static-electricity/latest/balloons-and-static-electricity_en.htmlhttp://phet.colorado.edu/sims/html/balloons-and-static-electricity/latest/balloons-and-static-electricity_en.html

4. Charge • If an object has more electrons than protons it is negatively charged, if the object has more protons that electrons then it is positively charged. • It is only the electrons that actually move when objects become charged.

5. Rank in order, from most positive to most negative, the charges qa to qe of these five systems. 1. qa > qe > qd > qc > qb 2. qa = qb > qe > qc > qd 3. qd > qc > qe > qa = qb 4. qd > qc > qe > qa > q 5. qe > qa > qd > qb > qc

6. Opposite charges attract; similar charges repel each other. • You can demonstrate this by hanging two oppositely charged rods as shown and note that they both move towards each other.

7. The symbol for charge is Q. • The unit of charge is the Coulomb – symbol is C • So for example an electron has a charge of 1.6 × 10-19 Coulombs

8. The Gold Leaf Electroscope • If the GLE is uncharged, the leaves will fall together. • If the leaves become charged – either positively or negatively – the leaves will stand apart A = insulated joint B = metal case

9. Functions: • To detect charge • To distinguish between positive and negative charge • To indicate approximate size of a charge • To test if an object is a conductor or an insulator

10. 1. Detect charge: • The leaf diverges due to the force of replusion between like charges

11. 2. To distinguish between positive and negative charge • Give electroscope known charge • Bring unknown charged object near cap • If divergence increases then electroscope and object have the same charge.

12. 3. To indicate approximate size of a charge • The larger the charge on the object, the greater the divergence

13. 4. To test if an object is a conductor or an insulator • Charge electroscope. • Touch cap with object • If leaf collapses the object is a conductor.

14. Earthing • If an object becomes charged (due to a build-up of electrons say), and the object is then ‘earthed’ (connected to earth), the electrons will separate as much as possible, resulting in most of them quite literally ‘going to earth’. • The object then becomes neutral.

15. This is the principle behind Earthing buildings....

17. Charging a conducting object by Induction To Charge an Insulated Conductor Positively:

18. Bring a negatively charge object near the conductor; the positive and negative charges become separated on it. • Keeping the charged object in place, earth the conductor by touching it with your finger. • Some of the negative charge on the metal flows through you to earth. • Remove your finger, then and only then remove the rod. • The conductor will now be positively charged.

19. Electroscope • Conduction • Charged rod is brought near scope • Charged rod touches scope transferring some charge • Scope is left with same charge as rod • Induction • Charged rod is brought near scope • Scope is briefly grounded allowing charge to flow on (or off) scope • Scope is left with opposite charge as rod

20. Coulomb’s Law • Coulomb’s Law states that the force between two point charges is proportional to the product of the charges and inversely proportional to the square of the distance between them. • Mathematically: F  (Q1 Q2), • And F  1 / d2

21. Putting this together = where the proportional constant is •  (epsilon) is known as “the permittivity” of the medium; it represents the extent to which one charge will be affected by another, e.g. glass has a different permittivity value than air. • Note that air (the permittivity of air) is taken to have the same value as 0 (the permittivity of a vacuum or free space).(0 = 8.9 × 10-12 F m-1)

22. Electric Fields and Electric Field Strength • An electric field is a region of space where electric forces can be felt.

23. Direction of electric field lines • The convention is that lines come out of positive charges and go into negative charges

24. Note that where the electric field is strong, the field lines are close together; where the field is weak the lines are far apart.

25. Electric field strength (E) at a point is the force per unit charge at that point The unit of Electric Field Strength is the Newton per Coulomb (N C-1).

27. Why have a concept called ‘Electric Field Strength’? • Because we may need to know what effect a given charge would have on another charge, if that second charge was placed a certain distance from it. • Because the size of the force depends on the magnitude of the two charges.

28. To Demonstrate Electric Field Patterns0-5000 V • Place two electrodes in a petri-dish. • Pour some oil into the petri-dish and sprinkle on some semolina powder. • Connect a high voltage source (about 2,000 volts) to the metal electrodes. • Result: The semolina lines up in the direction of the field, showing the electric field. • NB: You will lose marks in an exam if you do not stress the high voltage.

29. 0-5000 V EHT

30. Distribution of Charge on an Insulated Conductor • All static charge resides on the outside of a conductor. • Demonstration • Charge the conductor (a metal can will do fine). • Using a proof plane, touch the inside of the can and bring it up to the GLE. • Notice that there is no deflection. • Touch the proof plane off the outside of the can and bring it up to the GLE. • Notice that there is a deflection. • Conclusion: charge resides on outside only

32. Application: • A Van de Graff Generator is used to generate a large build-up of charge which resides on the outside surface of the dome. • A full-body metal-foil suit protects an operator when working on high voltage power lines

33. Static Charge on a conductor tends to accumulate where the conductor is most pointed

34. Demonstration • Charge a pear-shaped conductor . • Use a proof plane to bring charge from the curved end to the GLE, and note that there is a minimal deflection. • Use a proof plane to bring charge from the pointed end to the GLE, and note that the deflection is much greater. • Conclusion: Most of the charge is at the pointed end.

35. Point Discharge (also known as ‘The Point Effect’) • We have seen that on a pear-shaped conductor, most charge accumulates on the pointed end (or at least it should!). • Now let’s assume the object is charged negatively. • If the build-up of charge at the pointed end is sufficiently large, it can attract nearby positive ions from the air and cause them to accelerate towards the pointed end. • En route, these ions are likely to crash off other molecules, causing them to become ionised (by knocking electrons off the atoms). • Ions with opposite charge to that on the point move towards this end and neutralise the charge on it. • Ions with the same charge move away from this end creating an ‘electric wind’.

37. Everyday Effects of Static Electricity • Dust on Television Screens • Static on Clothes

38. Applications of Electric fields • Precipitators (Used to extract smoke particles from the air. • Xerography (Photocopier machines)

39. Electrostatic precipitators • These transfer charge to the dust particles using the point effect, then charged dust particles are attracted to metal plates with the opposite charge. Used in chimneys, air purifiers, etc.

40. Xerography (photocopiers) • Image of a document focused on a drum (charged electrostatically), light causes electric charge to escape from regions on the drum where it falls. Toner particles attracted to charged areas of the drum and then image copied (transferred) to a sheet of paper.

41. Industrial Hazards • Explosion in flour-mills • Explosion when fuelling aircraft • Damage to integrated circuits. • Electric shock