Propeller Antifouling for a better performing propeller! | Get a Prop

2. Propeller Antifouling for a better performing propeller! | Get a Prop Propeller performance plays an important part in vessels operation. But fouling is one of the major causes of propeller deterioration. But corrosion can be minimized by the process of propeller antifouling. A cheap, effective propeller antifouling paint is as rare as a good pun. The antifouling coating must not only ward off all marine growth, it must present a smooth slick surface that can stand up to the constant water friction when the boat is under power. In case of a folding prop, the coating must also adhere in nooks and crannies, and in some cases, even withstand metal-to-metal contact. These demands are well beyond the reach of any run-of-the-mill marine antifouling coating. Types of Antifouling The paint you use must be specialist paint. The environment within it is working harsh, to say the least, so in our view you are best to go for the best paint you can afford. Then you require to decide what sort of paint to use. There are three types of antifouling paints:-    Hard paint Eroding Copper-based If you can afford it, then a copper based paint should make the sacrament of antifouling a much less regular affair. Whereas most boats will require treatment yearly, a boat painted might last for years before needing re-treatment. If you can’t run to a copper based solution, there are two other types obtainable to you, namely eroding and hard paint. The former is the most commonly used antifouling and unless your boat is fast or else sits on a drying mooring, then an eroding paint is probably the most obvious choice. Again in general, the more expensive the paint, the better the solution is. Have any doubt regarding propellers antifouling coating? Then visit our official website now or else get-in-touch with us at:- Get A Prop 8142 S. March Point Road, Anacortes, WA, 98221 USA Ph: +1-866-790-7767 Email: info@getaprop.com Website: www.getaprop.com