1 / 13

Cluster, unified interface configuration :

Cluster, unified interface configuration :. Cluster option : . The cluster option must be activated on all the CamTrace cameras from which you wish to use a unified interface. This option is not included in the standard CamTrace license.

zahi
Download Presentation

Cluster, unified interface configuration :

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Cluster, unified interface configuration :

  2. Cluster option : • The cluster option must be activated on all the CamTrace cameras from which you wish to use a unified interface. This option is not included in the standard CamTrace license. • In the example in the next slide, the cluster option is installed on CamTrace 1 (master). All cameras in cluster mode can be operated from any client workstation, which connects to CamTrace 1. • Important: The CamTrace cameras in the cluster (1 to n) are not required to communicate with each other. They can be on separate networks. Each client workstation establishes the link with all the servers (1 to n). Servers that are part of the cluster (1 to n) are defined on the CamTrace equipped with the cluster option (1). You can install the cluster option on a number of servers only (for ex. no. 1 and no 2) ; in this case, there will be a backup cluster server in the event of a connection server failure (no. 1).

  3. Unified cluster interface : 192.168.0.100 192.168.0.101 Switch 192.168.0.102 Switch Switch CamTrace 2 192.168.1.101 CamTrace 1 Master 192.168.1.100 CamTrace n 192.168.1.102 Switch Step A: Trusted site Add CamTrace 1: 192.168.1.100 Add CamTrace 2 : 192.168.1.101 Add CamTrace n : 192.168.1.102 Step B: Identical user and password declared on CamTrace 1, CamTrace 2 and CamTrace n. The user connects to the Master CamTrace 1 : 192.168.1.100

  4. The unified interface is used to create and operate single views, cycles, groups, maps and players (digital video players) whose cameras are attached to any one of the CamTraces in the cluster (1 to n). • However, the administrative functions of the cameras, the configuration parameters, the low bandwidth groups, system logs, viewing of recordings via the database and the display screens (slave workstations) remain attached to each server. • Each server keeps its own Menucam.

  5. Extended company surveillance, unified cluster interface : The client workstations connect to the master CamTrace server. Master CamTrace Server Operating networks Switch Image wall : Each image wall is specific to a given CamTrace server. CamTrace Serveur

  6. Configurations : • Configuration to be performed on all cluster servers : • All cluster servers (1 to n) must have the same user name and the same profiles as those to be used on the CamTraces to which you will connect (no 1 or no 2) to access the unified interface. • Configuration to be performed on client workstations : • The client workstations must be able to access all CamTraces in the cluster (1 to n). You must therefore declare, on all client workstations, all the CamTraces in the cluster in the trusted sites. The client PCs must accept the cookies sent by the cluster servers.

  7. Add CamTrace to the trusted sites

  8. Add CamTrace to the trusted sites

  9. Configuration : • Configuration to be performed on the CamTrace : • Connect to the administration web interface then click on servers. The server manager window appears with contains the list of cluster servers (two in our example). Click on ‘add a CamTrace server’ to declare a new server. Leave the server id empty. It will be allocated automatically; The ports specified are the default ports. • Click on Add, then, in the window that appears, reload the main menu to re-establish the connections with all servers. • The main menu should show a new server (three in our example). • Note: To make a cluster architecture accessible from the outside, all the TCP ports of the cluster members must be different and each member of the cluster must be accessible, from the inside and the outside, by a network with the same name (use of a public DNS or modification of host files of client workstations).

  10. If one or more servers are not active, click on the status line appearing below the time to obtain a status. • Login in red : the user or the profile with which you are connected to the supervisor does not exist on the CamTrace server concerned. • Web in red : the web service of the CamTrace server CamTrace concerned is inactive. • Control in red : the video service of the CamTrace server concerned is inactive.

  11. 1 ALLEE DE LA VENELLE 92150 SURESNES Tel : + (33) 1 40 99 94 31 Fax : + (33) 1 45 06 76 58 www.camtrace.com

  12. CamTrace : the multi-brand solution.

More Related