1 / 12

MEE 452: Example 3-2

Shell-and-Tube Heat Exchanger Analysis: [From B.K. Hodge and R.P. Taylor, Analysis and Design of Energy System, 3rd Ed. , Prentice Hall, 1999]

zada
Download Presentation

MEE 452: Example 3-2

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Shell-and-Tube Heat Exchanger Analysis: [From B.K. Hodge and R.P. Taylor, Analysis and Design of Energy System, 3rd Ed., Prentice Hall, 1999] Counter-flow, single-pass: 80 copper tubes, 1 in, no. 18 BWG in staggered array ST=SL=2 in. Shell 1.7 ft ID, 30 ft long with 20 baffles and 10 tubes along C.L. Shell fluid: 50,000 lbm/hr water @50oF in. Tube (hot) fluid: 66,000 lbm/hr n-butyl alcohol @150oF. MEE 452: Example 3-2 Two-tube-passfor illustration only

  2. COUNTER FLOW PARALLEL FLOW Cmin=min(CH,CC) T T HOT FLUID DT1 DTH DTH HOT FLUID DT DTmax DT1 DTLM DTLM DT DT2 DTC DT2 DTC COLD FLUID COLD FLUID dA dA A A Heat Exchanger Correlations

  3. Tube arrangement in shell Think of your geometry and calculate your fluids’ cross-sectional areas and velocities, etc ...

  4. Parallel and Staggered arrangement

  5. Friction factor for staggered tubes PT=ST /D PL=SL /D

  6. MathCAD S&T HX analysis 1 of 7 Fluids’ properties etc ...

  7. MathCAD S&T HX analysis 2 of 7 Fluids’ passage geometries, etc ...

  8. MathCAD S&T HX analysis 3 of 7 Reynolds’, Nu’s, & h’s, etc ...

  9. MathCAD S&T HX analysis 4 of 7 Thermal resistances, conductance, etc ... q=(DT/R)any=constant ...

  10. Fluid properties (var. T) corrections MathCAD S&T HX analysis 5 of 7 UA, NTU &e=

  11. HX effectiveness e= Qduty & Th/c,out MathCAD S&T HX analysis 6 of 7 Tube-side Pressure drop ... or 16/Re otherwise

  12. Tube-side Pressure drop ... MathCAD S&T HX analysis 7 of 7 Shell-side Pressure-drop ...

More Related