1 / 5

STAIRCASE RESTRICTIONS

STAIRCASE RESTRICTIONS. The area available can be restricted by the: position of walls dimensions of the available space location of access doorways to rooms height between floor levels. DOGLEGGED STAIRS. You can use a dog legged stair in areas which have:

Download Presentation

STAIRCASE RESTRICTIONS

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. STAIRCASERESTRICTIONS The area available can be restricted by the: position of walls dimensions of the available space location of access doorways to rooms height between floor levels.

  2. DOGLEGGED STAIRS • You can use a dog legged stair in areas which have: • a minimum length of floor space (total going) • sufficient width for two stair flights. • You would use a half space landing when installing a dog legged stair. Doorway restrictions Restricted width

  3. STRAIGHT FLIGHT Landings are sometimes needed in long flights of stairs Straight flight stair You can use a straight flight stair in areas with: a large length of floor space at ground floor level (going) or minimum width for only one stair flight. You would install a landing when the No rises exceeds18.

  4. OPEN NEWEL STAIR WITH QUARTER SPACED LANDING USE • a minimum amount of floor space at both levels • minimum width for both flights.

  5. REGULATIONS COVERING DIMENSIONS OF STAIR DESIGN • The Building Code of Australia • Australian Standard AS1657-1992-Fixed platforms etc. • These provide the standard regulations for the dimensional requirements including: • maximum and minimum rise and going of each step • maximum space between tread surfaces on an open stair • minimum handrail heights on stairflights and landings • maximum gaps between balusters on balustrade • minimum vertical clearance – headroom • minimum clearance from stair landings to adjacent doors. • You should make sure your specifications and drawings meet these minimums and maximums when you design stairs.

More Related