1 / 16

Horizontal Boring Machines

Horizontal Boring Machines. http://www.undergroundequip.com. Authorized Dealers for Middle East, Pakistan and Afghanistan Tel: +92 51 250 4226 Fax; +92 51 252 5677 Email: info@qulite.com. Made in THE USA!. Services & Solutions. Advantages of Prairie Dog Boring Machines.

yehudi
Download Presentation

Horizontal Boring Machines

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Horizontal Boring Machines http://www.undergroundequip.com Authorized Dealers for Middle East, Pakistan and Afghanistan Tel: +92 51 250 4226 Fax; +92 51 252 5677 Email: info@qulite.com Made in THE USA! • Services & Solutions

  2. Advantages of Prairie Dog Boring Machines • Small, lightweight and inexpensive compared to competitive products • Carbide tipped bits and Back Reamers allow the machine to handle boring through the toughest conditions (including rocks) • Very low operating costs • Easy to operate, 1-2 operators can handle and operate the machines (except for the heavier models) • Ideal machines for non destructive boring with Low Environmental Impact, No road cuts required. • Sturdy Frames and long operational life • Operates Above or Below Ground • Best suited for : • Laying water and sewerage lines • Electrical conduits and wires • Irrigation lines and conduits/pipes • Telephone lines • Gas lines • Parks

  3. Criteria for selection The machines are sorted on the basis of bore dia, bore length and engine power

  4. How it works- Simple 7 step procedure Step 1: Dig trenches on either side of the road up to desired depth, one trench to accommodate the machine and the other for come-out hole. Come out hole Trench for machine

  5. Step 2: Lower the machine into the trench and attach the first Drill Rod and Pilot Bit at the end. Attach the water hose and start engine. Start moving the machine forward.

  6. Step 3: As each joint of Drill Rod is pushed into the ground a new one is added behind.

  7. Step 3: (Contd..) Keep on adding Drill Rods until the Pilot Bit reaches the come-out hole.

  8. Step 4: Remove the Pilot Bit and screw on the Backreamer

  9. Step 5: Start moving the machine backwards and start removing the Drill Rods as it becomes completely exposed (at machine end)

  10. Step 6: Once the Backreamer reaches the start point cleanup the hole with a Pull-plate (if required).

  11. Step 7: Slide in the pipe while the hole is still lubricated with slush Note: The above steps are for illustration purpose only. Please read the user manual and safety instructions (supplied with the machine) before operating.

  12. Thank YouFor further information please contact: Authorized Dealers for Middle East, Pakistan and Afghanistan Tel: +92 51 250 4226 Fax; +92 51 252 5677 Email: info@qulite.com • Services & Solutions

More Related