1 / 23

Il sistema di HV del sottorivelatore DT S. Braibant, P. Giacomelli, M. Giunta , E. Borsato

Bologna, 20/01/2007. Il sistema di HV del sottorivelatore DT S. Braibant, P. Giacomelli, M. Giunta , E. Borsato. DT HV electrodes. HV layout. 1 chamber. A876. A877. Inside SY1527. HV layout. 1 macrochannel= 1 layer = 4 HV channels. Wires0. Wires1. OutputChannels (Set V0, i0…).

yachi
Download Presentation

Il sistema di HV del sottorivelatore DT S. Braibant, P. Giacomelli, M. Giunta , E. Borsato

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Bologna, 20/01/2007 Il sistema di HV del sottorivelatore DT S. Braibant, P. Giacomelli, M. Giunta, E. Borsato

  2. DT HV electrodes Il sistema di HV delle camere DT

  3. HV layout 1 chamber A876 A877 Inside SY1527 Il sistema di HV delle camere DT

  4. HV layout 1 macrochannel= 1 layer = 4 HV channels Il sistema di HV delle camere DT

  5. Wires0 Wires1 OutputChannels (Set V0, i0…) HV LAYER1 Global HV+ Strips HV PHI1 Cathodes Global HV- LV HV THETA MacroChannels (Set ON/OFF, RuP,…) HV PHI2 >100 m A876 A877  powers 1 DT HV Hardware setup Il sistema di HV delle camere DT

  6. HV layout Il sistema di HV delle camere DT

  7. HV modules • 10 SY1527 (8 used by HV, 1 by LV, 1 spare) • 65 A876 (60 used, 5 spares) • 250+10 A877 (190+10 with 3 connectors, 60 with 2) (240 modules used, 10+10 A877/3 spares) • Apart from 5 A876, all modules have been received at CERN • All modules have been tested Il sistema di HV delle camere DT

  8. HV modules • A876 • 60/60 modules received (77 produced by CAEN) • 3 showed problems and have already been repaired (for 2 of those CAEN did not observe anything wrong) • A877 • With 2 connectors 60/60 received (63 produced by CAEN) • Sent back to CAEN 12, on 7 nothing wrong found, on the remaining 5 some electronics faults were found (active components changed, hv cable disconnected, calibration redone, etc.). Repaired. • With 3 connectors 190/190 received • 35 (!!) have been sent to CAEN to be repaired. On 15 modules nothing wrong found, on the other 20 found electronics problems (active components changed, hv cable disconnected, calibration redone, etc.). Repaired. • Still at CAEN 4 A877 Il sistema di HV delle camere DT

  9. HV slow controls software • Slow controls software is based on the SCADA environment PVSS. • We have the largest slow controls system in operation at CERN with more than 15000 channels to control and monitor. • When all channels will be operated together we will have 6 dedicated PCs to run the software as a distributed environment. • Our slow controls system can be operated as stand alone or connected to the central CMS DCS. Il sistema di HV delle camere DT

  10. DT HV System HV System HV Wheel-2 HV Wheel-1 ………. HV Wheel+2 HV MB1 …….. HV MB4 CUs HV Chamber 1 …….. HV Chamber 14 HV SL 1 HV SL 2 HV SL 3 HV L1 HV L2 HV L3 HV L4 Wires 1 Strips IBeams Wires 0 DUs Il sistema di HV delle camere DT

  11. HV DUs & CUs • 3 types of DUs: • FwCaenChannelWires • FwCaenChannelStrips • FwCaenChannelIBeams • States based on dpe actual.status & actual.vMon • CUs: • HVLayerNode • States: ON, OFF, RAMP_UP, RAMP_DOWN, OVERCURRENT, WARNING, TRIPPED, ERROR, …… • HVSLNode (“Translator” node type) • States: PHYSICS, READY, NOT_READY, WARNING, ERROR, …… • HVGenericNode (for Chamber, Station and Wheel level?) • States: PHYSICS, READY, NOT_READY, WARNING, ERROR, …… Il sistema di HV delle camere DT

  12. FEATURES: • Java ActiveX based User Interface • Reads geometry descriptions from EMDB • Completely interactive • Good for error tracking and correlation • Easy integration into the supervisor FOR DEVELOPERS: • Easy to use from PVSS • Functions providing full control of the detector 3D panels. • Create labels • Create behaviors • Automatically move the view and rotation points. DT Interactive UI (by R. Gomez-Reino Garrido)

  13. Example Il sistema di HV delle camere DT

  14. Included functionalities (I) • Monitoring, settings, FsMs trees,… • Java Interface (R. Gomez-Reino) Il sistema di HV delle camere DT

  15. Included functionalities (II) • Connection to Oracle Configuration Db Il sistema di HV delle camere DT

  16. Included functionalities (III) • Connection to Oracle Condition Db Il sistema di HV delle camere DT

  17. Il sistema di HV delle camere DT

  18. Il sistema di HV delle camere DT

  19. Procedures implemented • Ramp up (single layer) in 4 steps: • 3(1) intermediate state for Wires(Strips and I-Beams) • Ramp down in 2 steps • 1 intermediate state for Wires • Recover from Trip: • Switch off the whole layer; after a delay switch on the layer using the ramp up procedure (check trip frequency, currents,…) • OvC handling: • If OvC on Strips or I-Beams lower Wires voltage by 200 V • A877 boards not current limited; trip condition handled via software (now hardware trip time available too) • Voltage difference check: • Every 20 sec. check of voltage difference btw Strips and Wires; if bigger than 1850 V (i.e. discharge regime), Wires voltage lowered by 200 V • Check communication with power supplies Il sistema di HV delle camere DT

  20. Conclusions • We have all the modules of the HV system in hands at Cern. HV modules test was finished several months ago. • All the A877 modules have been installed in the racks on the balconies • Slow controls software ready and in operation since a long time. • We have observed a relatively high number of faults in the A877 modules. Only a few in the A876 modules. Il sistema di HV delle camere DT

  21. HV modules tests • 4 different tests: • Test 1: Min. voltage, Max. current • Resistive Loads • Test 2: Max. voltage, Max. current • RC loads (same of Test 3) • Test 3: Ramping cycles • RC loads (same of Test 2) • Test 4: Min. voltage, Null current • No loads Il sistema di HV delle camere DT

  22. HV modules tests • “OvC with oscillating Voltage” • Observed during Test 1 in the majority of the newer A877 MB4 boards (no problems during Tests 2&3, where boards used in working range) • Hardware differences between the older A877 standard boards and the newer A877 MB4 boards? YES Some components of the newer boards have a different tolerance: this was causing a slightly different behavior of the channels in their standard working range → a capacitor was added to each channel CAEN assures that board performances in the standard working range is the same for all boards Il sistema di HV delle camere DT

  23. Conclusions • For the magnet test we plan to power a total of 14 DTs in sector 10 of wheel YB+1 and sectors 10 and 11 of wheel YB+2. • The HV system used will be the final one manufactured by CAEN. Also aim at having also final cables, patch panels, etc. • PVSS project with FSM integrated with the central CMS DCS will be available. Il sistema di HV delle camere DT

More Related