Here you can learn how to replace the waste Cartridge in a Xerox Phaser 7400.Xerox printer support nz provide you step by step solution for this problem. You can call on Xerox printer technical support Number 64-48879116 <br><br>
How to Replace the Waste Cartridge in a Xerox Phaser 7400
Most of people returned or recycled the waste cartridge to the Xerox. There are some ink cartridges that are available in Xerox printer and copier machines. These containers must be replaced occasionally to keep the printer working efficiently. You donâ€™t need to be worried about how to replace it as our technical experts provided you few instructions to do this task. You can also call us on Xerox printer helpline number to get any type of technical assistance.
Our assistance is always available on working days and working hours. Moreover, we have formed a highly proficient technical team, who are very supportive and reliable. You just need to dial Xerox printer technical supportto get direct interaction with our experts.
Open the plastic cover surrounding the control panel on the front of your Xerox Phaser 7400 by pulling on either side of the cover so that it swings down and away from the printer. The long, black waste toner cartridge becomes accessible and must be removed before installing a new cartridge.
Press down and hold the the orange release tab located on the top right side of the used waste toner cartridge to unlock the cartridge from the printer. While holding the orange release tab, pull the used waste cartridge down and away from the printer, and remove it by lifting it out of your printer.
Remove the small, white plastic piece near the orange release tab. Place that piece over the hole on the used waste toner cartridge to prevent any waste toner from escaping from the cartridge.
Align your new waste toner cartridge with the empty space created by removing the used cartridge. Place the bottom of the new cartridge in the printer. Push the top of the cartridge into the printer until it locks into place
Close the front plastic cover by swinging it up and toward the printer until it snaps into place
Xerox printer support number