html5-img
1 / 14

Laser Assisted Forming

Laser Assisted Forming. Dieter Schuöcker Alexander Kratky, Department of Nonconventional Processing, Forming and Laser Technology Vienna University of Technology / Austria (European Union ). Content. Introduction Bending Wire Drawing Deep Drawing Outlook. Introduction.

xanthe
Download Presentation

Laser Assisted Forming

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Laser Assisted Forming Dieter Schuöcker Alexander Kratky, Department of Nonconventional Processing,Forming and Laser TechnologyVienna University of Technology / Austria (European Union)

  2. Content • Introduction • Bending • Wire Drawing • Deep Drawing • Outlook

  3. Introduction source : Doege/Meyer-NolkemperSaeed Fließkurvenatlas metallischer Werkstoffe

  4. Bending • avoiding cracks and rupture • reduce springback effect • increase angle of bend • reduce bend radius

  5. Wire Drawing

  6. Deep Drawing • drawability • depth of draw • finish drawing • influence material flow

  7. Deep Drawing Tool • diameter punch 48mm • isolating layer on blankholder and die

  8. Deep Drawing Dilas • flat temperature profile • limited temperature

  9. Deep Drawing Fiber

  10. Deep Drawing Fiber

  11. Deep Drawing Laser Finger

  12. Deep Drawing Laser Finger

  13. Outlook • Bending: suitable for industrial use • Wire drawing: finishing the experimental setup • Deep Drawing: • lubricants, • testing different materials, • tailored blanks, • diodes into the tool

  14. Laser Assisted Forming END

More Related