1 / 8

On the estimation of WWER-1000 RPV materials embrittlement by a standard surveillance program

On the estimation of WWER-1000 RPV materials embrittlement by a standard surveillance program. V . Vasilchenko , V . Kovyrshin State Scientific and Technical Centre NRS , Kiev , Ukraine E. Grynik, V. Revka, Institute for Nuclear Research NASU, Kiev, Ukraine.

wind
Download Presentation

On the estimation of WWER-1000 RPV materials embrittlement by a standard surveillance program

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. On the estimation of WWER-1000 RPV materials embrittlement by a standard surveillance program V. Vasilchenko, V. Kovyrshin State Scientific and Technical Centre NRS, Kiev, Ukraine E. Grynik, V. Revka, Institute for Nuclear Research NASU, Kiev, Ukraine

  2. WWER-1000 RPV material radiation embrittlement estimation is based on valid Charpy impact test data (according to PNAE G-7-002-86 a fluence scatter for specimens should not exceed 15 %) There are some shortcomings in surveillance assembly design related to a high scatter ( 35 %) in fluence values for irradiated Charpy V-notch specimens The high scatter in fluence values raises doubts regarding the estimation of a critical brittleness temperature shift Some surveillance sets include the modernized assemblies with flat containers that allows irradiating the Charpy V-notch specimens according to PNAE G-7-002-86 requirements Specimen reconstitution technique is also used to get valid surveillance test data What is the difference in RPV material radiation embrittlement rate estimated by standard and modernized surveillance program, and the reconstitution technique Background Objective Safety Assurance of NPP with WWER MNTK-2007 , May 29 – June 1 2007, FSUE EDO “GIDROPRESS”, Podolsk, Russia

  3. WWER-1000 RPV weld metal with high nickel (1,55  1,88 % wt) and manganese (0,67  0,97 % wt) content Surveillance Charpy V-notch specimens (10 mm x 10 mm x 55 mm) Standard surveillance program Khmelnitsk NPP-1 (Kiev Institute for Nuclear Research) Rovno NPP-3, South-Ukrainian NPP-2, Zaporozhye NPP-3 (RSC Kurchatov Institute) Modernized surveillance program South-Ukrainian NPP-2 (Kiev Institute for Nuclear Research) Reconstitution technique Rovno NPP-3, South-Ukrainian NPP-2, Zaporozhye NPP-3 (RSC Kurchatov Institute) Materials and specimens Safety Assurance of NPP with WWER MNTK-2007 , May 29 – June 1 2007, FSUE EDO “GIDROPRESS”, Podolsk, Russia

  4. Reconstitution technique provides with ∆TF shift data for higher neutron fluence Reconstitution technique results in a high scatter of ∆TF shift data relative to a regression line Standard surveillance program gives a chemistry factor AF that is in a good agreement with embrittlement rate estimated using a reconstitution technique Charpy impact test data from the standard surveillance program may be considered as valid for Rovno NPP-3 unit Radiation shift for Rovno NPP-3 weld metal Safety Assurance of NPP with WWER MNTK-2007 , May 29 – June 1 2007, FSUE EDO “GIDROPRESS”, Podolsk, Russia

  5. Radiation shift for Khmelnitsk NPP-1 weld metal • 4 irradiated surveillance sets allow specimens to be grouped by fluence to meet PNAE G-7-002-86 requirements without a reconstruction • ∆TF shift data based on the different approaches describe a tendency of material radiation embrittlement in the same way • Chemistry factor AF based on the standard surveillance test data can be used to estimate the KHNPP-1 weld metal embrittlement rate Safety Assurance of NPP with WWER MNTK-2007 , May 29 – June 1 2007, FSUE EDO “GIDROPRESS”, Podolsk, Russia

  6. A comparison of radiation embrittlement rate Notes: *) specimen grouped by neutron fluence **) modernized surveillance assembly Safety Assurance of NPP with WWER MNTK-2007 , May 29 – June 1 2007, FSUE EDO “GIDROPRESS”, Podolsk, Russia

  7. Open symbol is data for SUNPP-2 modernized assembly Radiation embrittlement rate according to the different approaches • There is a good correlation between the AF values for KHNPP-1, SUNPP-2 and RONPP-3 units • Chemistry factor AF for ZANPP-3 based on the reconstitution technique is noticeably less in comparison to standard surveillance test data • Application of the reconstitution technique does not always confirm the embrittlement rate obtained from a standard surveillance program Safety Assurance of NPP with WWER MNTK-2007 , May 29 – June 1 2007, FSUE EDO “GIDROPRESS”, Podolsk, Russia

  8. Conclusions • Standard surveillance program gives a chemistry factor AF that is in a good agreement with embrittlement rate estimated using a reconstitution technique for KHNPP-1, SUNPP-2 and RONPP-3 RPV weld metal • Chemistry factor AF for ZANPP-3 RPV weld metal based on the reconstitution technique is noticeably less in comparison to standard surveillance test data • Charpy impact test data from the standard surveillance program can be used to get a reliable estimation of weld metal radiation embrittlement rate for KHNPP-1, SUNPP-2, RONPP-3 and ZANPP-3 units Safety Assurance of NPP with WWER MNTK-2007 , May 29 – June 1 2007, FSUE EDO “GIDROPRESS”, Podolsk, Russia

More Related