1 / 18

Chapter 9 Sinusoids and Phasors

Delta-to-wye and wye-to-delta conversions Phase Sifters. AC Bridges. Problem Solutions. Chapter 9 Sinusoids and Phasors. Huseyin Bilgekul Eeng224 Circuit Theory II Department of Electrical and Electronic Engineering Eastern Mediterranean University. Y- Δ and Δ -Y Equivalent Circuits.

wholbert
Download Presentation

Chapter 9 Sinusoids and Phasors

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Delta-to-wye and wye-to-delta conversions Phase Sifters. AC Bridges. Problem Solutions Chapter 9Sinusoids and Phasors Huseyin BilgekulEeng224 Circuit Theory IIDepartment of Electrical and Electronic EngineeringEastern Mediterranean University

  2. Y-Δ and Δ-Y Equivalent Circuits • Y-Δ and Δ-Ytype equivalent conversions will be most useful when considering Three Phase circuits. • Impedances Z1, Z2 and Z3 are are Y connected. • Impedances Za, Zb and Zc are Δ connected. • Y and Δ forms can be eqivalently converted from one form to the other. • Y-Δand Δ-Y conversions are valid for impedances as well as resistive circuits.

  3. Y-Δ and Δ-Y Equivalent Circuits • Y-Δ and Δ-Ytype equivalent conversions will be useful when considering Three Phase circuits in Chapter 12.

  4. Balanced Y-Δ and Δ-Y Equivalent Circuits • A delta (Δ) or Y (wye) circuit is balanced if it has equal impedances in all three branches. • Y-Δ and Δ-Y conversions is very simple for balanced circuits.

  5. Find I in the circuit given? Converting Δ Connection to Y form, we obtain Converting to Y form, we can simplify the circuit by combining the parallel and series elements Z

  6. P.P.9.12 Continued

  7. Phase Shifters (Leading Output) • Phase shifting is employed to correct undesirable phase shift of the AC voltage. Leading Output. Output Leads the input

  8. Phase Shifters (Lagging Output) • Phase shifting is employed to correct undesirable phase shift of the AC voltage. Lagging Output. Output Lags the input

  9. P.P.9.13 Design an RC circuit that provide 90° lagging phase shift. Find the output voltage if 10 Volt is applied.

  10. AC Bridges • The AC bridge is Balanced when no current flows through the meter.AC bridges are used in measuring inductance and capacitance values. A general AC bridge circuit

  11. AC Bridges • Unknown capacitance and inductances Cx and Lx are measured in terms of the known standard values Cs and Ls AC Bridge for measuring L AC Bridge for measuring C.

  12. Chapter 9, Problem 41.

  13. Chapter 9, Problem 51.

  14. Ch 9, Prob 55. Find Z in the network given that

  15. Chapter 9, Problem 77 a) Calculate the phase shift at 2 Mhz. b) Calculate the frequency at which phase shift is 45 degree.

  16. Chapter 9, Problem 77 a) Calculate the phase shift at 2 Mhz. b) Calculate the frequency at which phase shift is 45 degree.

More Related