Consumer fireworks forum february 24 2011
This presentation is the property of its rightful owner.
Sponsored Links
1 / 21

CONSUMER FIREWORKS FORUM February 24, 2011 PowerPoint PPT Presentation


  • 74 Views
  • Uploaded on
  • Presentation posted in: General

CONSUMER FIREWORKS FORUM February 24, 2011. NEW STANDARDS ISSUED BY AFSL. Standard for Girandolas. Girandolas 1. Construction Requirements - A launch rod is required for girandolas. ( the current standard does not include this requirement )

Download Presentation

CONSUMER FIREWORKS FORUM February 24, 2011

An Image/Link below is provided (as is) to download presentation

Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author.While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server.


- - - - - - - - - - - - - - - - - - - - - - - - - - E N D - - - - - - - - - - - - - - - - - - - - - - - - - -

Presentation Transcript


Consumer fireworks forum february 24 2011

CONSUMER FIREWORKS FORUM February 24, 2011


Consumer fireworks forum february 24 2011

NEW STANDARDS ISSUED BY AFSL


Consumer fireworks forum february 24 2011

Standard for Girandolas


Consumer fireworks forum february 24 2011

Girandolas 1

  • Construction Requirements - A launch rod is required for girandolas.

  • (the current standard does not include this requirement)

  • -The Launch Rod must be straight and rigid and securely attached to the base to prevent it from being damaged or detached during transportation, handling and normal operation.


Consumer fireworks forum february 24 2011

Girandolas 2

Performance

  • -- For items with multiple effects, the timing between effects must not exceed 10 seconds.

  • (the current standard does not include this requirement.)


Girando l as 3

Girandolas 3

  • Effective date: May 1, 2011


Requirement for booby traps

Requirement for Booby Traps

-- Booby traps must be packaged in a package meeting all requirements for retail sale that contains not more than 12 units.

(the current standard does not include this requirement)

-- Effective date: September 1, 2011


Reloadable tube aerial shell devices 1

Reloadable Tube Aerial Shell Devices 1

  • The current standard prohibits artwork or graphics or designs and shapes that would cause the device to look like a finished fireworks device.


Reloadable tube aerial shell devices 2

Reloadable Tube Aerial Shell Devices 2

New Requirements:

  • The shell may bear a name, description or depiction of the effects produced, provided it does not exceed 1.4 linear inches in any direction.

    - The shell may bear the name or logo of the manufacturer or distributor, or the brand name of the item, provided the name, logo or brand name does not exceed one linear inch in any direction.


Reloadable tube aerial shell devices 3

Reloadable Tube Aerial Shell Devices 3

  • Effective date: May 1, 2011


Requirement for fountains

Requirement for Fountains

Residual Burn Provision:

  • The finished item, including tubes and internal construction material, must not continue to burn or re-ignite after functioning.

  • Test Procedure – To Be Developed.

  • Effective date: October 1, 2011


Consumer fireworks forum february 24 2011

AFSL

Domestic Testing Program


Domestic testing program

Domestic Testing Program

  • AFSL/SGS to test fireworks manufactured or assembled in the U.S.

  • Purpose: To permit importers to certify products to comply with CPSC certification requirements.


Products manufactured from components or fully manufactured in us

Products Manufactured from Components or Fully Manufactured in US.

  • Additional Testing is required.

  • Samples will be collected by SGS from the Manufacturer’s warehouse.

  • Samples will be tested by SGS at Tulsa, OK lab.

  • Manufacturer’s controller will assign and monitor the application of AFSL Stickers to the finished lot.


Domestic program costs

Domestic Program Costs

  • Certification of assortments – US$0.07 per case.

  • Testing of finished items assembled from certified components – US$0.42 per case.

  • Testing of fully manufactured domestic products – US$0.75 per case.

  • Sample collection fee - US$150 per man-day.


Domestic program implementation date

Domestic Program Implementation Date

Implementation Date: February 24, 2011

Program Description Available

from AFSL Website:

www.afsl.org


Live demonstration of application procedures

Live Demonstration of Application Procedures


Questions

Questions


Contact

Contact

John D. Rogers, Executive Director

Jieli Tan, Office Manager

American Fireworks Standards Laboratory

7316 Wisconsin Ave, Suite 214

Bethesda, MD 20814

Phone: (301) 907-9115

Fax: (301) 907-9117

Email: [email protected]

www.AFSL.org

www.AFSL.org


Consumer fireworks forum february 24 2011

WWW.AFSL.ORG

THANK YOU!


  • Login