1 / 18

Ge Test-stands at MPI M unich

This document discusses the test-stands at MPI Munich for Canberra and DSG crystals, including the crystals used, test-stand operation steps, results, and future outlook. The test-stands aim to study various properties of Ge crystals and explore different physics scenarios using Monte Carlo simulations.

wderrick
Download Presentation

Ge Test-stands at MPI M unich

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Ge Test-stands at MPI Munich Xiang Liu • General • Crystals, Test-stands & Results • Outlook

  2. Crystals & Test-stands • 2 Canberra crystals • (for test-stands II & III) • Canberra-I : non-true coaxial, no segment (ready & tested) • Canberra-II: coaxial, 18 segments, 6 x 3z • 3 DSG crystals • (for test-stands I & III) • DSG-I : true coaxial, no segment (ready) • DSG-II : 6 segments (ready) • DSG-III: 18 segments, 6 x 3z • 3 test-stands: • Eurysis test-stand: for Canberra-I & II in LN2 (ready) • MPI test-stand: for DSG I II & III in LN2 (almost ready) • Vacuum test-stand: for DSG & Canberra crystals (September) Gerda Collab. , Jun 27-29, 2005 Page 2

  3. Goal • With Eurysis & DSG LN2 Test-stands: • handling Ge in LN2 • Ge Properties (resolution etc. with  source) • Segmentations (coincidence cut for ) • Pulse shapes (true & non-true coaxial) • MC verification (energy, pulse shape) With Vacuum Test-stand: • Dead layer thickness (with laser) •  source Gerda Collab. , Jun 27-29, 2005 Page 3

  4. Crystals Canberra-I Canberra-I: non-true coaxial, no segment, mounted on stick crystal preamp Canberra-II: 6 x 3z Gerda Collab. , Jun 27-29, 2005 Page 4

  5. Crystals Canberra-I Gerda Collab. , Jun 27-29, 2005 Page 5

  6. 1st Test-stand: Eurysis Test-stand • Made in Eurisys • For Canberra crystals only • Dewar ~50cm H, ~20cm R • Heater at top and bottom (to evaporate LN2) • Plug & play Open for crystal heater Safety valve source Gas & LN2 Canberra-I Eurysis Gerda Collab. , Jun 27-29, 2005 Page 6

  7. Eurysis Test-stand operation Steps: Fill Dewer with LN2. Take Canberra-I out from vacuum can. Dip Canberra-I into LN2. Apply HV and measure. Steps after measurement: Seal dewer gastight. Pump in gas N2 and LN2 out. Turn on top & bottom heater. Turn on heater around crystal for 2 hours. Take out canberra-I and put back to can and make vacuum. No condensation on crystal during warmup. Canberra-I Eurysis Gerda Collab. , Jun 27-29, 2005 Page 7

  8. Results from Eurysis Test-stand Jun 7th, 2005, Eurysis Test-stand with Canberra-I crystal. FWHM ~5keV at 1.173MeV, need more investigation. Gerda Collab. , Jun 27-29, 2005 Page 8

  9. Crystal DSG-I 3 Ge crystals from DSG: DSG-I : P-type, true-coaxial, no segment. Gerda Collab. , Jun 27-29, 2005 Page 9

  10. Crystals DSG-II & III DSG-II : P-type, true-coaxial, 6 phi segments (test at DSG done, now at Munich) DSG-III: 6phi x 3z Gerda Collab. , Jun 27-29, 2005 Page 10

  11. 2nd Test-stand: MPI Test-stand • Similar to Eurysis, made in MPI • Bigger dewer ~1m H, 30cm R • Gallow loading crystals. • Only for DSG I, II & III • Similar operating procedure. Cover Hanging strings Crystal model Dewer Faraday cage Gerda Collab. , Jun 27-29, 2005 Page 11

  12. MPI Test-stand Operation Critical: no condensation on crystal during warm-up  minimize time to remove LN2 and warm up detector.  Plan to use little heater. Expect the first result within 1-2 weeks. Load crystal During operation Gerda Collab. , Jun 27-29, 2005 Page 12

  13. MPI vs. Eurysis Teststand MPI test-stand has many advantages: • closer to Gerda design (mini-Gerda), can test support strings & cable in LN2. • built in house, easy to modify according to new requirement. • Support strings flexible, can hang 2 crystals together and take coincidence data. • Test-stand built in house, cost “no” money. vs. • In principle, can dip Canberra crystal into MPI test-stand, & v.v. • Same physics tests Gerda Collab. , Jun 27-29, 2005 Page 13

  14. 3rd Test-stand: Vacuum Test-stand Vacuum tanks Gerda Collab. , Jun 27-29, 2005 Page 14

  15. Vacuum Test-stand • 3 stations mounted together • Sources move in 3D around crystal • Crystal fixed & cooled through LN2 pipes • For both Canberra & DSG crystals • ,  sources & laser can be used • Expect first run September Gerda Collab. , Jun 27-29, 2005 Page 15

  16. DAQ XIA Pixie-4. On board PC. Each card reads 4 channels. 14bit ADC, 75MHz spc. for pulse shape. NIM cards for HV and preamp. power supply PC Pixie card Gerda Collab. , Jun 27-29, 2005 Page 16

  17. Outlook Eurisys Test-stand: More study with Canberra-I, solve resolution problem. Canberra-II detector end of this year MPI Test-stand: DSG-I 1-2 week. True coaxial, good for pulse shapes. DSG-II crystal ready, 1-2 week, study segments and more pulse shapes. DSG-III arrive end of this year Vacuum Test-stand: Start data taking September Study dead layer with laser, hadronic interaction with sources. Gerda Collab. , Jun 27-29, 2005 Page 17

  18. Conclusion • Many test stand setups: • Different crystals, non-true, true-coaxial, none, 6 & 18 segments. • Different environment, LN2, Vacuum. • Different sources, ,  & laser • Rich physics will be explored: • Ge general properties. • EM & hadron interactions. • Pulse shape. • All with MC simulations. • Any suggestions, ideas about measurement, simulation, please contact us! Gerda Collab. , Jun 27-29, 2005 Page 18

More Related