API RP 2D JSA Work Team Recommendations. March 16, 2011 Meeting. API RP 2D JSA Work Team. APPENDIX B – Commentary on Job Safety Analysis
API RP 2D JSA Work Team
March 16, 2011 Meeting
Safe offshore crane operations are determined by the following factors:
a. The JSA process should identify the hazards that may be encountered throughout the lifting operation or crane activity. Hazards may include, but not be limited to:
b. The JSA process should identify measures taken to eliminate or mitigate any hazard or safety concern identified through the JSA process.
c. The JSA process should identify the proper equipment needed to make the lift successful. Proper equipment may include, but not be limited to, the following:
d. The JSA process should include an alternate emergency procedure should unforeseen circumstances jeopardize the safety or success of the lifting operation.
e. The JSA process should identify the physical requirements and/or limitations, environmental conditions, personal protective equipment, and safety factors relating to the specific lifting operation.
f. The JSA process should be conducted by a designated person in charge of the lifting operation .
g. The JSA process should identify if the lift to be made is static/onboard or dynamic/offboard.
h. The JSA process should identify the equipment to be lifted the weight of the lift and sequence of lifts.
i. The JSA process should identify if any lift will be made over a hazardous areas such as a well bay, process equipment or living quarters.
j. The JSA process should include participation of all personnel involved with, or affected by, the lifting operation.
k. The JSA process should ensure that all personnel involved with the lifting operation know their role and responsibilities for the lifting operation.
l. The JSA process should ensure that all personnel involved with, or affected by, the lifting operation are aware of their “Stop Work Authority” and their obligation to exercise the authority should they see a potential hazard that has not been identified or mitigated.
m. The JSA process should be performed in conjunction with, and compared to, any procedure or lifting plan if such procedure or plan is available to ensure all hazards are identified and remediated.