1 / 14

530.352 Materials Selection

530.352 Materials Selection. Lecture #21 Steels - part II Wednesday November 2 nd , 2005. Transformations :. Equilibrium transformations (slow cooling)  ->  “ferrite”  -> Fe 3 C “iron carbide”   ->  + Fe 3 C “pearlite”

vivek
Download Presentation

530.352 Materials Selection

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. 530.352 Materials Selection Lecture #21 Steels - part IIWednesday November 2nd, 2005

  2. Transformations : • Equilibrium transformations (slow cooling) ->  “ferrite” -> Fe3C “iron carbide” ->  + Fe3C “pearlite” • Nonequlibrium (fast cooling / quenching) -> ’ “martensite”

  3. Pearlite : • Two phases ( + Fe3C)

  4. Normalized (slow cooled) steels;mechanical properties : 2,500 50 Strength (MPa) Ductility (%) f UTS 500 YS 0 0 1% w/o Carbon

  5. Martensite : • Quenched in distortions : + C C Fe

  6. Martensite mechanical prop. : • very hard and • very brittle (too brittle !!!)

  7. Quench and Temper : • Temper : heat treat at intermediate T (300-600 C) • Mechanical properties: • regains toughness (critical) with only a moderate drop in hardness • Microstructurally : • C comes out of lattice a precipitates as Fe3C, and distortion decreases with decrease amounts of dissolved C. • Loss of distortion leads to bcc structure and ductility. • Fe3C precipitates - precipitation strengthen the .

  8. Quenched and tempered : 2,500 50 UTS f YS Strength (MPa) Ductility (%) f UTS • normalized • tempered 500 YS 0 0 1% w/o Carbon

  9. Heat treatments and cooling : • Normalizing (heating to form ) • T ~ 1,000 C • much easier to roll / forge / form at this temperature • Quench - or - Slow cooling • martensite • pearlite • Tempering (heating to “soften” martensite) • carbides form, distortions relax

  10. Quench rates : • To form martensite in pure Fe • Critical Cooling Rate (CCR) ~ 100,000 C/sec • To form martensite in mild steel : Fe - 0.8% C • CCR ~ 200 C/sec • To form martensite in alloy steels:Fe - 0.2-.6%C + 2-7% (Mo, Mn, Cr, Ni) • CCR < 1 C/sec

  11. Alloying elements are added to : • improvehardenabilityof the steel • aides nucleation of martensite • solution strengthen and precipitation hardening • MxCy carbides form • give corrosion resistance • especially Cr which forms Cr203 • stabilize FCC austenite at RT • especially Ni • tougher, more ductile and easier to form • non-magnetic and creep resistant (diffusion is slower in FCC)

  12. Alloying of steels : Type of steel:Fe + ...Typical uses: Low-alloy .2%C + pressure vessels, aircraft .8Mn,1Cr,2Ni parts, high  applications. High-alloy .1% C High T and anti-corrosion, Stainless-steels .5Mn,18Cr,8Ni silverware, medical, etc.

  13. Steel terminology (SAE-AISI) : • Plain carbon • 10xx • Manganese steels • 13xx • Nickel steels • 23xx • Ni-Cr-Mo steels • 43xx • HSLA • 9xx Note: xx indicates carbon content in hundredths of a percent

  14. Other steel standards : • SAE-AISI • Society of Automotive Engineers ; American Iron and Steel Institute • ASTM • American Standards for Testing and Materials • AMS • Aerospace Materials Specifications • DIN • Deutsches Institut fur Normung • JIS • Japanese Industrial Standards Committee • UNS • Unified Numbering System

More Related