The re-positioned ground pad is in the right place. But:. Multiple ground tracers (see slide 2). Multiple Ground tracers. Multiple ground tracers caused by different heights of anchor pads. Different levels for tracers because of different heights of the anchor pads. A nchor and
Multiple ground tracers
(see slide 2)
Different levels for tracers because of different heights of the anchor pads
A anchor padsnchor and
tracer beam are
As the anchor
does not follow
This beam is not tracer.
I am not sure of why it is required though
This beam is tracer – and this follows anchor
Anchor edge and p0 edge don’t exactly line up anchor pads
I increased the size (width , along x-axis) of p0 such that it goes beyond anchor
I am not able to fix this. This has to do with changing l, L1, L2 of line 64 of latest netlist. But I am not sure of how these parameters are computed
Anchor Displaces out of P0 box
In the absence of the tracers L1, L2 of line 64 of latest netlist. But I am not sure of how these parameters are computed
Different end points, not constrained to join the anchor.
When the number of fingers is used as a parameter, it no longer spaces the comb drives out correctly in x. When the starting number of fingers is less than 10, the layout converter hangs, and no gds file is created.
This should be fixed if the files that I sent are updated