1 / 19

COMP541 Flip-Flop Timing

COMP541 Flip-Flop Timing. Montek Singh Feb 27, 2012. Topics. Lab 6: Feedback VGA Display Timing Generator Timing analysis flip-flops sequential systems clock skew. Lab 6: Helpful VGA Links. VGA Timing Recommended: http://tinyvga.com/vga-timing

vicki
Download Presentation

COMP541 Flip-Flop Timing

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. COMP541Flip-Flop Timing Montek Singh Feb 27, 2012

  2. Topics • Lab 6: • Feedback • VGA Display Timing Generator • Timing analysis • flip-flops • sequential systems • clock skew

  3. Lab 6: Helpful VGA Links • VGA Timing • Recommended: http://tinyvga.com/vga-timing • http://www.epanorama.net/documents/pc/vga_timing.html • Interesting • http://www.howstuffworks.com/tv.htm • http://computer.howstuffworks.com/monitor.htm • http://www.howstuffworks.com/lcd.htm • http://plc.cwru.edu/

  4. Lab 6: Tips • One resolution does not work with most monitors • 1024x768: removed from the list • Be careful about the “Sync Polarity” • A “1” means a downward going pulse • sync signal is normally high, but goes low during the pulse • A “0” means an upward going pulse

  5. Lab 6: Questions? • Anyone having trouble with it?

  6. Timing of sequential circuits

  7. Input Timing Constraints • Setup time: tsetup = time before the clock edge that data must be stable (i.e. not changing) • Hold time: thold = time after the clock edge that data must be stable • Aperture time: ta = time around clock edge that data must be stable(ta = tsetup + thold)

  8. Output Timing Constraints • Propagation delay: tpcq= max time after clock edge by which output Q is guaranteed to have stabilized (i.e., not changing anymore) • Contamination delay: tccq= min time after clock edge during which Q will not have started changing yet

  9. Dynamic Discipline • The input to a synchronous sequential circuit must be stable during the aperture (setup and hold) time around the clock edge • Specifically, the input must be stable • at least tsetup before the clock edge • at least until thold after the clock edge

  10. Implications on Design • Constrains operation • Given a clock period, constrains circuit delays • Given a circuit, constraints clock period • The delay between registers (clock period and rate) has a minimum and maximum delay, dependent on the delays of the circuit elements • Delays of both comb. logic and flip-flops must be taken into account

  11. Setup Time Constraint • Setup time • input to R2 must be stable at least tsetup before the clock edge • constrains max delay from R1 through combinational logic • What’s min clock period? What’s Tc? Tc ≥ tpcq + tpd + tsetup tpd ≤ Tc – (tpcq + tsetup) • So, clock period constrained by: • Delay in CL • Delay in previous regs • Setup requirement of R2

  12. Hold Time Constraint • Hold time • input to R2 must be stable for at least thold after clock edge • constrains the minimum delay from register R1 through the combinational logic • often try to design circuits with 0 hold time requirement thold < tccq + tcd tcd > thold - tccq

  13. Timing Analysis Timing Characteristics tccq = 30 ps (FF contamination) tpcq = 50 ps (FF propagation) tsetup = 60 ps thold = 70 ps tpd = 35 ps tcd = 25 ps tpd = tcd = Setup time constraint: Tc≥ fc = tpd = 3 x 35 ps = 105 ps tcd = 25 ps Setup time constraint: Tc≥ (50 + 105 + 60) ps = 215 ps fc = 1/Tc = 4.65 GHz Hold time constraint: tccq + tcd > thold ? (30 + 25) ps > 70 ps ? No!

  14. Fixing Hold Time Violation Add buffers to the short paths: Timing Characteristics tccq = 30 ps tpcq = 50 ps tsetup = 60 ps thold = 70 ps tpd = 35 ps tcd = 25 ps tpd = 3 x 35 ps = 105 ps tcd = 2 x 25 ps = 50 ps Setup time constraint: Tc≥ (50 + 105 + 60) ps = 215 ps fc = 1/Tc = 4.65 GHz Hold time constraint: tccq + tpd > thold ? (30 + 50) ps > 70 ps ? Yes!

  15. Hold Time • Often flip-flops are designed for a hold time of zero • To avoid these tricky problems

  16. Clock Skew • Clock doesn’t arrive at all registers at the same time • Skew is the difference between the arrival times of the clock edge at two different (typically neighboring) flip-flops • Examine the worst case: • guarantee that discipline is not violated for any register pair • many registers in a system!

  17. Setup Time Constraint with Clock Skew Worst case: CLK2 is earlier than CLK1 Tc ≥ tpcq + tpd + tsetup + tskew tpd ≤ Tc – (tpcq + tsetup + tskew)

  18. Similar Issue w/ Hold Time • We won’t go over example • Have a look in book

  19. Next Time • Read Section 3.5.1-3.5.3 • Then we’ll move on to memories • Section 5.5

More Related