1 / 13

Performance Verification of LMR Systems

Performance Verification of LMR Systems . Using TIA TSB-88.3c Methodologies 2011APCO Western Regional Conference, Ontario, CA David Buchanan. TSB-88 History. This series of documents was prepared in response to requests from APCO, LMCC and the NCC

verdad
Download Presentation

Performance Verification of LMR Systems

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Performance Verification of LMR Systems Using TIA TSB-88.3c Methodologies 2011APCO Western Regional Conference, Ontario, CA David Buchanan

  2. TSB-88 History • This series of documents was prepared in response to requests from APCO, LMCC and the NCC • These organizations recognized that new technologies and the drive for more efficient use of spectrum required better methods for frequency coordination. • TSB-88 also covers: • Independent Methods of Performance Modeling • Propagation and Noise

  3. What We Will Cover • Area Coverage • Covered Area Reliability • Delivered Audio Quality (DAQ) • Mean and Median Signal Levels and other ugly statistical terms • Outdoor Coverage testing • Developing a test methodology to verify system performance

  4. What Do We Mean by Coverage Boundary?

  5. Yucaipa, CA Example of a coverage Boundary

  6. Define Coverage! • % of the Area? • % of the Area with X% of Confidence • What level of signal? • Faded or not faded? • What % of time • Why do we need all these statistics? • Unfortunately radio propagation is not constant over time and area • It can only be characterized using statistics

  7. Why don’t we decide on a method to define coverage! • Start with signal level Higher value for Interference limited systems or Portable coverage -94 dBm -106 dBm Faded Threshold Static Threshold -116 dBm -123 dBm Inferred Noise Floor

  8. Test Tiles We need to divide our coverage area into tiles to test for the signal level throughout the coverage area

  9. So How many Tiles? • Estimate of proportions • Tt = Z2pq/e2 Where: Tt = number of test tiles Z = Standard Deviate unit (confidence level 97% = 1.881) p = Service Area Reliability (95% = .95) q = 1-p e = Sampling error allowance (e =2% = .02) And Tt >= 100

  10. Example for Number of tiles Tt = Z2pq/e2 Tt = 2.2362*.95*(1-.95)/.022 = 594 2.236 = 99% confidence level as recommended by TSB-88 594>100 so Service area needs to be divided into 594 equal area tiles Also for outside tests Tile size ≥ 100λ x 100λ but less than 2 km x 2 km

  11. The “Greater Than” Test • We now need to test each tile one time to determine the signal level • How do you test outdoors? • You need to measure 50 subsamples to produce a 90% confidence level that the measured value is within +/- 1 dB of the true value. Also the subsamples should be measured over 40 wavelengths. Use the median value of these measurements for each tile. • A tile passes if the measured value is >= to the CPC value (level from slide 7)

  12. Does My System Pass? • To find out divide the number tiles that pass by the total number of tiles. Example: 594 total tiles and 580 passed = .976 or 97.6 %. If your criteria was 97% area coverage – the system passes. If not your vendor has some problems. • You should also do subjective voice checks for analog systems particularly for simulcast systems as they can show good levels but not be optimized in the overlap areas. For digital systems measure the bit error rate to check for voice quality.

  13. A Few Other Notes • Use an automated system for the testing • Don’t mix mobile and portable testing if the service areas differ • Not all tiles may be accessible for testing and should be excluded • Some tiles may be critical to have coverage and those should be noted to the vendors before system design • There are methods for indoor coverage testing and mobile data system testing in the document

More Related