1 / 1

Final Idea

Final Idea. FINAL PROPOSAL. This page shows the materials and processes that am going to use to make my final product. I am going to use a range of materials therefore different fixing/joining methods. ALL MEASUREMENTS ARE IN MILLIMETERS (MM).

varen
Download Presentation

Final Idea

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Final Idea FINAL PROPOSAL This page shows the materials and processes that am going to use to make my final product. I am going to use a range of materials therefore different fixing/joining methods. ALL MEASUREMENTS ARE IN MILLIMETERS (MM) I am mainly going to use MDF, and acrylic. The lid will be made of balsa wood. However I will also use materials that would need to be purchased, which include – hinges, locks and a handle (made of recycled aluminium) screws and bolts. Other than these, the whole product will be cut out and joined using various manufacturing techniques. Top view (closed) Top view (inside) 3 6 6 Side views PARTS 4 & 5 6 4 6 – TWO PIECES of acrylic cut out and must be folded from the edges (strip heater) inwards. 8 The acrylic needs to be fitted onto the base – using a router (divide the base into 3 parts) bolt 1 9 2 2 5 30 30 50 50 7 This piece needs to be cut then folded (using a strip heater) or beaten to shape at 25mm from the bottom, horizontally. This piece needs to be cut from the top so that the dowel sticks can rest down when closing the box 8 3 Part 10 Since the dowel mechanism needs to move up and down – ANOTHER dowel piece would be drilled to part 2 and 9. 2 10 9 EXTERNAL COMPONENTS REQUIRED NOTE:THESE COMPONENTS WILL BE PURCHASED. NOT MADE IN THE WORKSHOP This orthographic view is of the top of the box. Part 6 [a] (which is the piece that goes at the bottom) will have 3 holes drilled into it using a pillar drill. Each hole will be at 90 mm intervals starting from 40mm off from the bottom of the piece (labeled ‘bottom end’) 6 a Bottom end O O

More Related