1 / 13

Hydroelectric energies

Hydroelectric energies. Rivers energy Sea energy. Hydropower plants. Worldwide, hydropower plants produce about 24 percent of the world's electricity and supply more than 1 billion people with power. Hydropower is the second source of electricity in France.

vanna
Download Presentation

Hydroelectric energies

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Hydroelectric energies Rivers energy Sea energy

  2. Hydropower plants • Worldwide, hydropower plants produce about 24 percent of the world's electricity and supply more than 1 billion people with power. • Hydropower is the second source of electricity in France. • In France it is 12% of the total electricity production, with an average production capacity of 70 TWh per year

  3. How does it work ? Hydropower plants are based on a rather simple concept Hydropower plants harness water's energy and use simple mechanics to convert that energy into electricity. Water flowing through a dam turns a turbine which turns a generator.

  4. Here are the basic components of a conventional hydropower plant • Dam - Most hydropower plants rely on a dam that holds back water, creating a large reservoir. Often, this reservoir is used as a recreational lake • Intake - Gates on the dam open and gravity pulls the water through the penstock, a pipeline that leads to the turbine. Water builds up pressure as it flows through this pipe • Turbine - The water strikes and turns the large blades of a turbine, which is attached to a generator above it by way of a shaft. The most common type of turbine for hydropower plants is the Francis Turbine, which looks like a big disc with curved blades. A turbine can weigh as much as 172 tons and turn at a rate of 90 revolutions per minute (rpm) • Generators - As the turbine blades turn, so do a series of magnets inside the generator. Giant magnets rotate past copper coils, producing alternating current (AC) by moving electrons. • Transformer - The transformer inside the powerhouse takes the AC and converts it to higher-voltage current • Power lines - Out of every power plant come four wires: the three phases of power being produced simultaneously plus a neutral or ground common to all three • Outflow - Used water is carried through pipelines, called tailraces, and re-enters the river downstream

  5. Here are the basic components of a conventional hydropower plant

  6. Pumped-storage hydroelectric plant

  7. Pumped-storage hydroelectric plant: • A plant that usually generates electric energy during peak load periods by using water previously pumped into an elevated storage reservoir during off-peak periods when excess generating capacity is available to do so. When additional generating capacity is needed, the water can be released from the reservoir through a conduit to turbine generators located in a power plant at a lower level.

  8. Hydroelectric production

  9. The Rance tidal power plantThe dam of the plant measures 332.5 meters

  10. The Rance tidal power plant, power from the ocean • The Rance site lent itself well to such a project. • First, because the amplitude between low and high tides is one of the highest in the world (it reaches up to 13.5 metres during equinoctial tides) • Second, because the estuary offers a reservoir of 22 km2 capable of impounding 180 million m3. At peak periods, 18,000 m3 of water per second go through the estuary, or a flow that is ten times greater than that of the Rhone River. • To harness such power, the estuary had to be blocked by a 750 metres long and 13 metres high structure. Twenty-five years of studies and six years of construction works were needed to erect the Rance tidal power plant. • Since 1967, this facility, the only full-scale power station of this type in the world, generates 600 million kWh every year, enough to provide energy to 250 000 households.

More Related