1 / 46

Power System Voltage Control and Stability

Third NSF Workshop on US-Africa Research and Education Collaboration Abuja, Nigeria, December 13-15, 2004. Power System Voltage Control and Stability. V. Ajjarapu (vajjarap@iastate.edu) Iowa State University Ames, USA. Outline. Introduction Aim Educators Involved Area of Research

utsey
Download Presentation

Power System Voltage Control and Stability

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Third NSF Workshop on US-Africa Research and Education Collaboration Abuja, Nigeria, December 13-15, 2004 Power System Voltage Control and Stability V. Ajjarapu (vajjarap@iastate.edu) Iowa State University Ames, USA

  2. Outline • Introduction • Aim • Educators Involved • Area of Research • POWER SYSTEM SECURITY AND CONTROL • An Overview • Medium of Interaction • Web based • Travel • Activities Planned

  3. Our Department • 48 faculty • Power: 4 + 2 • Over 30 power graduate students • Typical undergraduate power class: 50 • Mainly power systems: Security and dynamics , risk analysis, economics and markets • State of the art power electronics lab

  4. Aim • Building African collaboration with ISU researchers to build further understanding of different power system case studies. • Developing a roadmap for future research activities in power / energy, information systems technology, environmental and social dynamics, and education pedagogy

  5. Educators Involved • Prof. George O. Anderson, Univ. of Botswana • Dr. Tanimu Abubakar, Ahmadu Bello University, Zaria, Nigeria • Dr. Venkataramana Ajjarapu (with support from EPNES ISU faculty) • Graduate/Undergraduate Students from these Universities

  6. Research : POWER SYSTEM SECURITY AND CONTROL: Main Area of Expertise : Voltage Stability , Oscillatory Stability, VAR Planning and dispatch , ATC : Sub Area: Power Electronics and Real Time Control The group is developing a comprehensive approach for voltage and oscillatory stability analysis and control. This group is also actively involved in the Available Transfer Capability(ATC) evaluation as limited by voltage as well as oscillatory stability. Reactive power requirements and pricing required for deregulated environment. These techniques will be applied to realistic practical power networks.

  7. Our Group’s Research Overview • Developing techniques that are very effective for stressed power systems • A single tool can be adapted for cost based security with timing of control information • Available Transfer Capability (ATC) is part of this research • Web Based Security Tools for Distance Education

  8. Power Flow, CPF and EQTP • Conventional power flow program calculates steady state solution for a given operating condition. • Continuation power flow (CPF) traces a series of power flow solutions for a given scenario. You can also trace the bottom of the PV curve. • Equilibrium Tracing Program (EQTP) is an extension of CPF. DAE instead of pure power flow equation is used to represent the power system. It has the capability of detecting both voltage and oscillatory instabilities.

  9. Voltage Damping ratio boundary for D= D0 Oscillatory stability margin boundary Corrector Predictor A2 A1 Voltage stability margin boundary Parameter α Illustration of voltage stability, oscillatory stability and damping ratio boundary tracing Security Margin Tracing

  10. Numerical results for Identification: CPF

  11. Example For Voltage Stability Boundary: Reactive Power Variation

  12. Optimal Margin Boundary Tracing

  13. Basic Formulation For a sequence of specified margin levels: Minimize a cost function : f(U) Subject to : Equality Conditions : F, G Inequality constraints : I Optimality conditions : Margin boundary conditions : Cobt Results in a set of nonlinear equations of the form:

  14. Formulation (Cont.) • The formulation could automatically generate a whole set of cost based optimal control configurations with each optimal control configuration corresponding to specific margin level that can be realized.

  15. Sample Result for OMBT

  16. Continuation Based Time Domain Simulation

  17. Key Points • No divergence due to singularity of • Time step size is adjusted according to the variation of dS/dt • Small time steps for fast dynamics and large time steps for slow dynamics

  18. Trajectory Before and After a Line Outage (with load variation)

  19. QSS Simulation

  20. Scenario  t 0 1 2 i (A+AT) singular before SNB? Preventive Control Strategies i = i +1 All Credible Contingencies Tested ? Sufficient Margin ? Voltage stability margin Oscillatory stability margin Damping ration margin Overall Strategy Credible Contingency Set Cj{C1,C2, …,Cm} j = j +1 Yes Check for (A+AT) singularity No Trace Eigenvalue for Hopf and Damping Margin Yes Yes No No

  21. Research Needs • On line monitoring : Fast calculations • Accuracy vs Speed • Timing Information: Fast vs Slow Collapse • Integration of Cost of Voltage and Oscillatory Stability Control in Overall Security Assessment

  22. Optimal Strategies for Load Shedding : when, where and how much

  23. Capabilities at ISU • A method to quickly identifies voltage and oscillatory instability points. • The change in the instability margin boundaries can be further obtained for any large change in system parameters. • Optimization and Time Domain Simulations are part of Continuation Based Approach • An efficient eigenvalue tracking method is introduced. • Provides damping information • Provides eigenvalue and eigenvector sensitivity information as a by product

  24. CapabilitiesCont.. • Automatic PV Curve Tracing. • Field current and armature current limits are included. • Provides true maximum power point by considering relevant dynamic factors. • There is no need for slack bus • Can solve unsolvable cases created by a line or generator outages

  25. Capabilities Cont… • Sensitivity Analysis (qualitative) • Screens the contingencies that may lead to voltage collapse • Locates the weak areas , identifies the critical generators • Provides voltage stability margin estimation

  26. Capabilities Cont.. • Available Transfer Capability as Limited by Voltage and Oscillatory Stability • Simulates simultaneous multi-area transactions • Provides Transaction Sensitivity: Identifies and ranks the transactions that are detrimental to voltage stability • Reactive power pricing /amount /location/ to maintain voltage security

  27. Capabilities Cont.. • Preventive and Corrective Strategies Against the Voltage Collapse • Strategies for minimum load shedding • Strategies for under-voltage load shedding • Strategies to maintain a certain voltage stability margin

  28. Capabilities Cont.. • Development of Advanced Algorithms for steady state, dynamic and time domain simulations • A simulation engine that can allow transient and quasi- steady state analysis • to obtain a comprehensive analysis to predict and control instabilities • When , where and how much control

  29. Capabilities Cont.. • On Line Voltage Stability Monitoring and Control: • Developing methodologies to utilize off line studies for on line implementation

  30. Application to Botswana 32 Bus Test System

  31. Botswana System (Cont..) • Demand : 243 MW • Supply • Local (coal): 128MW • ESKOM and SAPP : 115MW Simulation : Software : Aristo (Advanced Real Time Interactive Simulator for Training and Operation ) by ABB Dr. Anderson applied this software for Power flow and Fault analysis for 32 bus equivalent system

  32. Activities Planned wrt EPNES Project (research) Task 1: Setting up a test case for Botswana System Task 2: Study the maximum loadability with respect various contingencies and scenarios Task 3: Apply margin sensitivity to find the locations for shunt capacitors and series capacitors Task 4: Develop Automaton for backward algorithm

  33. Activities Planned (education) • Botswana group will participate in EE458 course • Develop I hour lecture material for this course

  34. EE/Econ 458: Economic systems for planning in electric power Students completing this course will be able to conduct studies in policy, economics, & engineering associated with transmission expansion; they will enhance their skills using optimization methods for engineering & economic problem-solving. • Evolutionary history of the power industry; present industry structure; • Discrete optimization; • Power system operation; • Electricity markets; • Power system planning and cost-effective solutions; • Cost recovery for transmission investment; basics of public good economics; • Cost-recovery models: • Tariff-based model; • Performance-based model; • Market-driven model; • Tax treatment of transmission investments. Will offer Fall 2004 on-campus, and via distance-education.

  35. Web Based Interaction

  36. Characteristics • Platform (OS) Independent • Standardized System Input Files • Graphic PV Curves Output • Detailed Simulation Process Output • Margin Sensitivity

  37. Simulation Website • http://design-2.ece.iastate.edu/newsim/index.php

  38. Simulation Website Cont.. • Input Files • IEEE Common Data Format is adopted as the input file for power system topology and parameters • Another standardized control file is used to specify load and generation increase scenario • Sample Test System input files are provided

  39. Simulation Website Cont.. • Upload Input Files

  40. Simulation Website Cont.. • Download Sample Systems

  41. Multiple Simulation Outputs • Tabular Output

  42. Outputs Cont.. • Graphic PV Curve

  43. Outputs Cont.. • Generator Reactive Power Output

More Related