1 / 21

RUN-TIME RECONFIGURATION OF AC DRIVE CONTROLLERS

University of Miskolc Department of Automation. RUN-TIME RECONFIGURATION OF AC DRIVE CONTROLLERS. Vásárhelyi József. E-mail: vajo@mazsola.iit.uni-miskolc.hu. Details about the author.

urbain
Download Presentation

RUN-TIME RECONFIGURATION OF AC DRIVE CONTROLLERS

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. University of Miskolc Department of Automation RUN-TIME RECONFIGURATION OF AC DRIVE CONTROLLERS Vásárhelyi József E-mail: vajo@mazsola.iit.uni-miskolc.hu

  2. Details about the author • 1983 - Graduated in Electronics and Telecommunication at Technical University of Cluj, Faculty of Electrical Engineering, Romania • Since 1992 lecturer at the University of Miskolc Department of Automation, Hungary • Presently PhD student at the Technical University of Cluj, Department of Electrical Drives and Robots, tutor: Prof.Dr. Mária Imecs • Research interests: configurable architectures and their application to control devices

  3. Summary • INTRODUCTION • Short introduction to reconfigurable systems and why are they used or should be used in AC drive control? • BACKGROUND • Presents the background of AC motor control. • IMPELMENTATION STRUCTURE • Give an answer of (a) possible hardware structure(s) • RECONFIGURABLE CONTROLLER IMPLEMENTATION • Presents the idea of reconfigurable controller • TIME CONSTRAINTS OF THE RECONFIGURABLE CONTROLLER • Time constrains of the reconfiguration process are presented • Implementation issues and possible reconfigurable structures are presented • CONCLUSION • Conclusions and future work are presented

  4. Introduction There are different approaches to define the reconfigurable systems [Brebner, Hauck, Luk, Maciejowski, Shirazi, Vuillemin]. Reconfigurable systems are usually considered those computing platforms whose architecture is modified by the software to suit the application at hand. Most of Re-configurable Computing Systems are plug-in boards made for standard computers and they act as a Co-processor attached to the main micro-processing unit. There was demonstrated significant potential for the acceleration of computing in general-purpose applications [Hauck, Smith, Villasenor, Vuillemin]. To treat the reconfiguration as a process one need a simple model for specifying and optimising designs, which contain elements that can be reconfigured at runtime.

  5. Comparing to the number of applications known in the reconfigurable filed just a few of them are concentrated in the study of vector control for AC drives. Vector control is a special field for digital signal processing. There are known dedicated DSP processors for digital motor control and successful implementations of vector control [Beierke] are referred. The DSP implementation of speed-sensorless induction motor drive using artificial intelligence is also known [Vas]. Up to now the studied literature by the author, only the research of Monmasson and his group is reported as direct application of reconfigurable structures in vector control for AC Drives [Monmasson, Tazi]. The most significant result introduced in reconfigurable control was the parallel-machine control architecture.

  6. The necessity of reconfiguration is based upon the practical observations that the performances of different types of vector controlled drives are different, depending primarily on the range of speed. • It is known that the rotor flux oriented vector control is simpler to implement and therefore, widely used. One drawback of this method is the low efficiency at low ranges of speed. • For lower speed range, the stator flux oriented vector control is preferred.

  7. 1. Background • Complex industrial systems and robotics make use of electrical drives. • Research efforts to find the optimal solution for AC motor control. • Since the reconfiguration idea appeared by the introduction of Field Programmable Gate Arrays [FPGA] there is an increasing interest to find other solutions then DSPs for AC motor Control. • Conclusion: Find a solution for reconfigurable control instead of using adaptive control

  8. Flux Current Controller Controller + Flux Model Speed Controller Vector control structure for AC drive [is] Current feedback Set parameters Power imR Converter Magnetising Flux PWM + S motor - Reference speed + S Speed feedback - w Source Texas Instruments

  9. Most of the motor control applications use asynchronous motors. The most often used method to control induction motors is the field oriented control method to achieve the best dynamic behaviour. Using the Park’s direct and reverse transformations the AC drive can be controlled like a separately exited DC machine, whereby the direct (d) path is representing the flux building component and the quadrate (q) path sets the electrical torque. Best results are obtained when the magnetising current imR is kept constant, which is direct proportional to the rotor flux r under the assumption that the main inductance Lh is constant

  10. (1) (2) (3) - (4) Based on the mathematical model of the induction machine in field co-ordinates, given in equation (1-4), a controller was developed and a flux model was derived.

  11. Co-ordinate Transformation System Transformations Two-Level Current Tracking Controller Flux Controller i*sd i*sq *r TA [D(-r)] [is]* i*sdr i*sdr TS [A]-1 - VSI - - - [(r)] Position Controller Speed Controller cosr sinr Current Sensors [is]* isd TS [A] imrd imrq r imr Lm AF C1Imr r isq  Induction machine Orientation-field Computation Integrator zp r Control Strategy Field Oriented DC Quantities Two Phase AC Quantities Three-Phase AC Quantities Vector control system for voltage-source inverter-fed induction machine

  12. 2. IMPELMENTATION STRUCTURES • The control system presents modularity as shown in the previous figure. The main modules are: • System transformations – direct and reverse Park’s transforms. • Orientation field computation • Control Strategy • Co-ordinate transformation • There is need for an extra module, not presented on the figure, which used for the external A/D conversion control. • This modularity allows exploiting of all the parallelism of the control algorithm.

  13. Starting from the mentioned modularity a reconfigurable controller structure it is introduced.

  14. The reconfigurable controller concept • Implement different controllers for the same controlled process. • Each controller structure can be seen as a distinct state of a state machine. • Transition from one state to the other can be determined by the state parameters of the controlled system. • If a transition condition occurs, i.e. the motor speed reference transits a limit value, the need for reconfiguration is fulfilled and the controller generates the self re-configuration process.

  15. The desired re-configurable controller can be implemented under the following conditions: • External memory is needed to store the several configurations (Configuration Store). • Either software or hardware has to be capable to start a reconfiguration on need. (Configuration Starter). • The evolution of the system must be predictable in order to pre-compute the possible configuration. • The system control states have to be quantified and finite; that is a condition imposed by the finite capacity of available external memory. (Configuration Memory) • The existence of ’high-fidelity’ models and effective approximation-identification algorithms for multivariable systems..

  16. Programmable logic structures considered for the hardware support of the controller: Triscend’s CSoC: • Configurable System Logic • Incorporated processor core • External and internal memory • Ability to start self reconfiguration Xilinx’s FPGA Virtex: • Abundant logic resources • Internal memory • Ability for partial reconfiguration • High computing speed • Relative high reconfiguration frequency

  17. 3. TIME CONSTRAINTS OF THE RECONFIGURABLE CONTROLLER • One can see that the controller structure is implemented in the configurable logic and the controller supervisor is a processor core. Depending on the implementation hardware the reconfiguration can be done as: • Partial reconfiguration – reconfiguring each module step by step conform to the method introduced by Hauck. The method is called pipeline morphing, intended to reduce the latency involved in reconfiguring from one pipeline to another. (This is the case if Xilinx FPGA it is used.) • Total reconfiguration – reconfiguring the controller as a whole. (This is the case of Triscend’s CSoC.)

  18. The reconfiguration times computed for partial or total reconfiguration methods are: • For the partial reconfiguration (reconfiguration is done by pipeline morphing) the maximum reconfiguration frequency is 66 MHz if the best existing hardware support is the Virtex FPGA. Reconfiguration of each module can be done if SelectMAP mode is used and the time needed for reconfiguration is under 1 ms. • The time needed for total reconfiguration of a CSoC by using the parallel mode initialisation, is 7.4 ms at 40MHz-reconfiguration frequency. This involves for implementation of the reconfigurable controller the use of two CSoC chips. Q and P represent the two control structures, C and C’ represent the reconfiguration control, [is] and [is]* are the observed current signal and the current control signal, respectively.

  19. Testing CSoC chip CSL resources used in the implementation of the controller:

  20. 4. CONCLUSIONS • It was explained why reconfigurable structures are used in vector control. • The controller modularity help reconfiguration • The controller states are quantified. • Reconfiguration have to be done between two sampling event. • Reconfiguration time have to be less or equal to sampling period of the controller. • Reconfiguration time may became critical and there is need for reconfigurable structures with faster reconfiguration time.

  21. Conclusion II. • Future work: • Finalise the CSoC implementation and test with an AC drive. • Implementation of control structures in Xilinx Virtex FPGA • Create standalone module library for the reconfigurable controller.

More Related