1 / 4

LARP Phase II Secondary Collimator RC-1

LARP Phase II Secondary Collimator RC-1. BPM Interface Revised 1/23/10. LARP LHC PHASE II COLL RC1 - S. Lundgren 21 Sep 2009 No 1/17. Current housing concept for BPMs. DN 152 CF flange mounts to Tank.

upton
Download Presentation

LARP Phase II Secondary Collimator RC-1

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. LARP Phase II Secondary Collimator RC-1 • BPM Interface • Revised 1/23/10 LARP LHC PHASE II COLL RC1 - S. Lundgren 21 Sep 2009 No 1/17

  2. Current housing concept for BPMs DN 152 CF flange mounts to Tank BPM target resolution is 25 microns with Jaw to BPM fiducialization on the order of of a few microns DN 100 Chain clamp flange LHC IR7 Button 61mm diameter geometry for saddle-cut 30.5mm diameter BPM buttons LARP LHC PHASE II COLL RC1 - S. Lundgren 21 Sep 2009 No 15/17

  3. BPM Attachment to Tank Chain Clamp Flange Flange ID is welded to Tank (has bottom tapped holes) Flange also supports the lifting fixture Bolted Flange LARP LHC PHASE II COLL RC1 - S. Lundgren 21 Sep 2009 No 17/17

  4. Conflat Flange features are machined after welding Fit check of Flange with Tank end curvature

More Related