1 / 20

SpW-10X Router ASIC Testing and Performance

SpW-10X Router ASIC Testing and Performance. Steve Parkes, Chris McClements, Space Technology Centre, University of Dundee Gerald Kempf, Christian Gleiss, Austrian Aerospace Stephan Fischer , EADS Astrium GmbH Pierre Fabry, ESA. Contents. SpW-10X Overview Team Testing Performance

ulla
Download Presentation

SpW-10X Router ASIC Testing and Performance

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. SpW-10X Router ASICTesting and Performance Steve Parkes, Chris McClements, Space Technology Centre, University of Dundee Gerald Kempf, Christian Gleiss, Austrian Aerospace Stephan Fischer, EADS Astrium GmbH Pierre Fabry, ESA

  2. Contents • SpW-10X Overview • Team • Testing • Performance • Availability and Support

  3. SpW-10X Parallel Port 9 Parallel Port 10 SpW-10X Overview SpW Port 1 Routing Switch SpW Port 2 SpW Port 3 SpW Port 4 Time-Code Interface SpW Port 5 SpW Port 6 Configuration Port 0 SpW Port 7 Routing Table SpW Port 8

  4. Router Features • Single chip SpaceWire router • Includes LVDS drivers and receivers • Path and logical addressing • Group adaptive routing • Priority arbitration • Start on Request • Disable on Silence • Watchdog timers p4

  5. Team • ESA • Funding and Management • University of Dundee • Design and Testing • Austrian Aerospace • Independent VHDL Test Bench • Transfer to ASIC technology • Astrium GmbH • Functional Testing • Atmel • ASIC Manufacture • STAR-Dundee • Support and Test Equipment

  6. Pre ASIC Implementation Testing • VHDL test bench for initial testing by UoD • Router IP in STAR-Dundee devices • Widely used by many organisations. • Independent test bench by AAE • Extensive tests • Identified several issues with the initial VHDL code. • SpW-10X implemented in Xilinx FPGA • Design kept as close as possible to final ASIC design. • SpW-10X FPGA extensively tested by Astrium GmbH. • SpW-10X FPGA mezzanine board • SpW-10X ASIC mezzanine board • Testing with SpaceWire Conformance Tester

  7. Post ASIC Implementation Testing • Functional validation by EADS Astrium, • Performance testing by University of Dundee, • Characterisation by Austrian Aerospace.

  8. SpW-10X Verification • VHDL Testbench with self-checking scenarios • RTL and Netlist (FPGA and ASIC) verified with the test bench • Code coverage checked for RTL simulations • Analysis of requirements which were not possible to simulate • Timing of ASIC verified with static timing analysis

  9. SpW-10X Verification Results • All functions checked – No errors • Simulation and analysis used for verification • FPGA and ASIC netlist verification • Showed implementation correct

  10. SpW-10X Validation Results • Validation covered all requirements of the SpW Router Specification • All tests passed • Two clarifications of Router Specification • Path addressing with different priority levels not required • Exact value for the Output Port Timeout Interval • ASIC Validation was performed successfully • Atmel LVDS I/O cells disable rather than tristate

  11. SpW-10X Network Testing • Extensive testing of the SpW-10X ASIC • In various network configurations • No anomalies found in ASIC device

  12. SpW-10X FPGA Testing

  13. SpW-10X ASIC Testing

  14. SpW-10X ASIC Testing

  15. Performance • SpW data rate configurable up to 200Mbps • Single supply voltage of 3.3V (3.0 to 3.6V) • Temperature: • Operational ambient temperature -55°C to +125°C • Maximum junction temperature +175°C • Maximum lead temperature (soldering 10 sec) +300°C • Storage temperature -65°C to +150°C • Radiation • Total dose 300Krad(Si) • No latchup up to 70 MeV/mg/cm2 • Package MQFP 196 with 25 mil pin spacing

  16. Performance • Power consumption (max): • Static Pst: 1W • OFF condition Poff: 1.6W • Total operational all SpW IF active Pop: 3.7W @ 200Mbps, 3.0W @ 100Mbps, 2.4W @ 10Mbps • Deactivated (Clk and LVDS buffer) SpW link: reduction of power by (Pop - Poff) × 0.1 + 0.06; E.g. with two SpW links deactivated operating at 200Mbps the power consumption is 3.16W • Data flow has very little influence on power consumption • For lower supply voltage (<3.6V): resistive model can be used, e.g. 69.4% of power at 3.0V

  17. Availability and Support • Available now as engineering samples • Atmel AT7910E • 2Q09 Flight parts • Front-line support from Atmel • www.atmel.com • Technical support from STAR-Dundee • www.star-dundee.com • Extensive user manual available • Includes schematic and PCB layout info • Evaluation kit from STAR-Dundee

  18. SpW-10X Evaluation Kit

  19. SpW-10X Evaluation Kit

  20. SpW-10X ASIC Mezzanine Board

More Related