1 / 6

06 April 2009

LBT Q1 2009 Eng/SW/Mtn Review. OSS – Optical Support Structure Paul Grenz. 06 April 2009. LBT Q1 2009 Eng/SW Review. Highlights. Dynamic Balance Development continues as time allows. Code now supports a preliminary 'simulation mode'. Functions in a similar manner to other OSS components.

tyme
Download Presentation

06 April 2009

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. LBT Q1 2009 Eng/SW/Mtn Review OSS – Optical Support Structure Paul Grenz 06 April 2009 LBT Q1 2009 Eng/SW Review

  2. Highlights • Dynamic Balance • Development continues as time allows. • Code now supports a preliminary 'simulation mode'. • Functions in a similar manner to other OSS components. • Not yet complete – other parts of the code must still be added. • Not yet tested on the mountain. • All reflective memory variables have been defined. • Thanks to Victor for helping define the naming scheme for the tanks, rather than using #1, #2, #3, etc... • All data exported from the MCSPU will be stored in ref. memory. • Subsystem code is complete, although untested. • GUI code is still at a very early stage of development. 06 April 2009 LBT Q1 2009 Eng/SW Review 2

  3. Highlights • Secondary Mirror • Movement Tests performed. • Basic movement tests were successful. • Move-0n-Sphere still needs work. • 'Initialization' bug addressed. • Mirror could not be re-initialized once the brake was applied after its first initialization. • The error was found in the subsystem code, which was not written to allow a transition from 'ready' back to 'standby' properly. • Code has been tested on the mountain and now works properly. 06 April 2009 LBT Q1 2009 Eng/SW Review 3

  4. Highlights • Tertiary Mirror • Now supports focal station adjustment/offsetting. • Can be performed with or without selector motion. • Motion is now 'locked out' until the brake is in a known configuration. • More detailed error messages and information have been added to help debug problems as/if they occur. • New variables added to reflective memory. • Current focal station name. • Current relative offset in mm from the current focal station. • Focal Stations can now be set using the OSSGUI. • Selection is by focal station name. • Uses positions as defined in OSS configuration file. • Preliminary motion tests were successful. 06 April 2009 LBT Q1 2009 Eng/SW Review 4

  5. Open Issues • Dynamic Balance • Work is constantly preempted. • Should be able to spend more time this coming quarter. • Secondary Mirror • Move-On-Sphere does not work. • Algorithm has errors. • Arcetri has found the problems and is generating a new document. • Should be fixed/implemented this coming quarter. • Tertiary Mirror • Brake Issues • No way to read 'status' out of UMAC reliably and consistently. • Takes a long time to set after a short move. • No way to override brake for testing. • Faulting errors still not well understood. 06 April 2009 LBT Q1 2009 Eng/SW Review 5

  6. Planning (Q2/2009)‏ • Dynamic Balance • Finish and test subsystem level code. • Finish and test GUI code. • Secondary Mirror • Implement new Arcetri algorithm for Move-On-Sphere. • Test new algorithm with help from Andrew. • Tertiary Mirror • Training in the black art of UMAC programming. • Make changes in UMAC firmware to address brakes and other issues. 06 April 2009 LBT Q1 2009 Eng/SW Review 6

More Related