1 / 18

KONFIGURASI INTERVLAN ROUTING

KONFIGURASI INTERVLAN ROUTING. Berikut langkah-langkah KONFIGURASI INTERVLAN ROUTING: *ps: -menggunakan beberapa switch vtp server, untuk memudahkan administrasi -menggunakan switch dan router cisco. #1 Lihat Gambar. #2 Konfigurasi Router.

tulia
Download Presentation

KONFIGURASI INTERVLAN ROUTING

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. KONFIGURASI INTERVLAN ROUTING Berikut langkah-langkah KONFIGURASI INTERVLAN ROUTING: *ps: -menggunakan beberapa switch vtp server, untuk memudahkan administrasi -menggunakan switch dan router cisco

  2. #1 Lihat Gambar

  3. #2 Konfigurasi Router • Aktifkan router dan hidupkan port yang digunakan sebagai penghubung dengan switch, dengan perintah sbb : • Router> • Router>enable • Router#configure terminal • Router(config)#interface fastEthernet 0/0 • Router(config-if)#no shutdown • Router(config-if)#exit • Lakukan enkapsulasi agar host antar vlan dapat saling terhubung dengan konfigurasi berikut : • Router(config)#interface fastEthernet 0/0.2 • Router(config-subif)#encapsulation dot1Q 2 • Router(config-subif)#ip address 192.168.18.255 255.255.255.0 • Router(config-subif)#exit • Router(config)#interface fastEthernet 0/0.3 • Router(config-subif)#encapsulation dot1Q 3 • Router(config-subif)#ip address 192.168.19.255 255.255.255.0 • Router(config-subif)#exit • Router(config)#interface fastEthernet 0/0.4 • Router(config-subif)#encapsulation dot1Q 4 • Router(config-subif)#ip address 167192.168.20.255 255.255.255.0 • Router(config-subif)#exit • Router(config)#interface fastEthernet 0/0.5 • Router(config-subif)#encapsulation dot1Q 5 • Router(config-subif)#ip address 192.168.18.255 255.255.255.0 • Router(config-subif)#exit

  4. #3 Konfigurasi Switch Server

  5. #3.1 Switch 0 • Switch>enable • Switch#configure terminal • Switch(config)#interface range fastEthernet 0/1 - 3 • Switch(config-if-range)#switchport mode trunk • Switch(config-if-range)#switchport trunk native vlan 1 • Switch(config-if-range)#exit • Switch(config)#vtp mode server • Switch(config)#vtp domain vq • Switch(config)#vtp password sssss • Switch(config)#vlan 2 • Switch(config-vlan)#name A • Switch(config-vlan)#exit • Switch(config)#vlan 3 • Switch(config-vlan)#name B • Switch(config-vlan)#exit • Switch(config)#vlan 4 • Switch(config-vlan)#name C • Switch(config-vlan)#exit • Switch(config)#vlan 5 • Switch(config-vlan)#name D • Switch(config-vlan)#exit

  6. #3.2 Switch1 & Switch2 • Switch>enable • Switch#configure terminal • Switch(config)#interface range fastEthernet 0/1 - 3 • Switch(config-if-range)#switchport mode trunk • Switch(config-if-range)#switchport trunk native vlan 1 • Switch(config-if-range)#exit • Switch(config)#vtp mode server • Switch(config)#vtp domain vq • Switch(config)#vtp password sssss

  7. #3.3 Cek table VLAN(di Switch 0, Switch1 & Switch2) • Switch#show vlan • VLAN Name Status Ports • ---- -------------------------------- --------- ------------------------------- • 1 default active Fa0/4, Fa0/5, Fa0/6, Fa0/7 • Fa0/8, Fa0/9, Fa0/10, Fa0/11 • Fa0/12, Fa0/13, Fa0/14, Fa0/15 • Fa0/16, Fa0/17, Fa0/18, Fa0/19 • Fa0/20, Fa0/21, Fa0/22, Fa0/23 • Fa0/24 • 2 A active • 3 B active • 4 C active • 5 D active • 1002 fddi-default act/unsup • 1003 token-ring-default act/unsup • 1004 fddinet-default act/unsup • 1005 trnet-default act/unsup

  8. #4 Konfigurasi Switch Client

  9. #4.1 Konfigurasi Umum Switch Client(Switch3,Switch4,Switch5,Switch6) • Switch>enable • Switch#configure terminal • Switch(config)#vtp mode client • Switch(config)#vtp domain vq • Switch(config)#vtp password sssss

  10. #4.2 Konfigurasi Khusus Tiap Switch Client

  11. #4.2.1 Switch3 • Switch(config)#interface fastEthernet 0/1 • Switch(config-if)#switchport mode trunk • Switch(config-if)#switchport trunk native vlan 1 • Switch(config-if)#exit • Switch(config)#interface range fastEthernet 0/2 - 3 • Switch(config-if-range)#switchport mode access • Switch(config-if-range)#switchport access vlan 2 • Switch(config-if-range)#exit • Switch(config)#exit

  12. #4.2.2 Switch4 • Switch(config)#interface fastEthernet 0/1 • Switch(config-if)#switchport mode trunk • Switch(config-if)#switchport trunk native vlan 1 • Switch(config-if)#exit • Switch(config)#interface range fastEthernet 0/2 - 3 • Switch(config-if-range)#switchport mode access • Switch(config-if-range)#switchport access vlan 3 • Switch(config-if-range)#exit • Switch(config)#exit

  13. #4.2.3 Switch4 • Switch(config)#interface fastEthernet 0/1 • Switch(config-if)#switchport mode trunk • Switch(config-if)#switchport trunk native vlan 1 • Switch(config-if)#exit • Switch(config)#interface range fastEthernet 0/2 - 3 • Switch(config-if-range)#switchport mode access • Switch(config-if-range)#switchport access vlan 4 • Switch(config-if-range)#exit • Switch(config)#exit

  14. #4.2.3 Switch5 • Switch(config)#interface fastEthernet 0/1 • Switch(config-if)#switchport mode trunk • Switch(config-if)#switchport trunk native vlan 1 • Switch(config-if)#exit • Switch(config)#interface range fastEthernet 0/2 - 3 • Switch(config-if-range)#switchport mode access • Switch(config-if-range)#switchport access vlan 5 • Switch(config-if-range)#exit • Switch(config)#exit

  15. #4.3 Cek Tabel VLAN(Switch3,Switch4,Switch5,Switch6) • Switch#show vlan

  16. #5 Tablel daftar network yang digunakan pada tiap Vlan :

  17. #6 Tes Ping antar host • Tinggal ping aja ke ip tujuan

  18. *sekian terima kasih • ^^v

More Related